DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

MH88422 データシートの表示(PDF) - Mitel Networks

部品番号
コンポーネント説明
メーカー
MH88422
Mitel
Mitel Networks Mitel
MH88422 Datasheet PDF : 14 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Preliminary Information
MH88422
AC Electrical Characteristics- MH88422-3
Characteristics
Sym Min
TypMax
Units
Test Conditions
1 Return Loss at 2-Wire
(370+ 620// 310nF)
RL
16 20
Test circuit as Fig 7
dB 200-4000Hz
2 Longitudinal to Metallic Balance
50 60
Test circuit as Fig 8
dB 300-3400Hz
3 Idle Channel Noise
Nc
at 2-Wire
at VX
-80 -70 dBmp
-80 -68 dBmp
4 Transmit Gain (2-Wire to Vx)
-1.4 -0.4 0.9
Test circuit as Fig 5
dB Input 0.5V @ 1kHz
Off-Hook
5 Frequency Gain
-1.6 -1.3 0.4
dB 300Hz
(relative to gain @ 1kHz)
-2.1 -0.5 0.9
dB 3400Hz
†AC Electrical Characteristics are over Recommended Operating Conditions unless otherwise stated.
‡Typical figures are at 25°C with nominal +5V and are for design aid only.
Note 1: All of the above test conditions use a test source impedance which matches the device’s impedance.
AC Electrical Characteristics- MH88422BD-1
Characteristics
Sym Min TypMax
Units
Test Conditions
1 Return Loss at 2-Wire
RL
(220+ 820// 115nF)
2 Longitudinal to Metallic Balance
3 Idle Channel Noise
Nc
at 2-Wire
at VX
4 Transmit Gain (2-Wire to Vx)
5 Frequency Gain
(relative to gain @ 1kHz)
16 22
30 65
40 60
46 60
-84 -70
-75 -70
-1.4 -0.4 0.9
-1.6 -1.3 -0.4
-1.2 -0.5 0
Test circuit as Fig 7
dB 300-3400Hz
Ref ZV5 Sec 2.5.2 and
2.8.3
Test circuit as Fig 8
dB 50-300Hz
dB 300-600Hz
dB 600-4000Hz
Ref ZV5 Sec 2.8.2
dBmp
dBmp
dB
dB
dB
Test circuit as Fig 5
Input 0.5V @ 1kHz
Off-Hook
300Hz
3400Hz
†AC Electrical Characteristics are over Recommended Operating Conditions unless otherwise stated.
‡Typical figures are at 25°C with nominal +5V and are for design aid only.
Note 1: All of the above test conditions use a test source impedance which matches the device’s impedance.
2-21

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]