¡ Semiconductor
ML9203-xx
Description of Commands and Functions
1. DCRAM data write
(Specifies the address of DCRAM and writes the character code of CGROM and CGRAM.)
DCRAM (Data Control RAM) has a 4-bit address to store character code of CGROM and
CGRAM.
The character code specified by DCRAM is converted to a 5¥7 dot matrix character pattern via
CGROM or CGRAM.
(The DCRAM can store 16 characters.)
[Command format]
1st byte
(1st)
LSB
B0 B1 B2 B3
X0 X1 X2 X3
2nd byte
(2nd)
LSB
B0 B1 B2 B3
C0 C1 C2 C3
B4 B5
10
B4 B5
C4 C5
MSB
B6 B7
0 0/1
MSB
B6 B7
C6 C7
0: Select DCRAM_A
1: Select DCRAM_B
: selects DCRAM data write mode and specifies DCRAM
address
(Ex: Specifies DCRAM address 0H)
: specifies character code of CGROM and CGRAM
(written into DCRAM address 0H)
To specify the character code of CGROM and CGRAM continuously to the next address, specify
only character code as follows.
The addresses of DCRAM are automatically incremented. Specification of an address is
unnecessary.
14/30