PI74AVC16836(2001) データシートの表示（PDF） - Pericom Semiconductor

部品番号

コンポーネント説明

メーカー

PI74AVC16836
(Rev.:2001)

2.5V 20-Bit Universal Bus Driver with 3-State Outputs

Pericom Semiconductor 

PI74AVC+16836

2.5V 20-Bit Universal Bus

1122334455667788990011223344556677889900112233445566778899001122112233445566778899001122334455667788990011223344556677889900112211223344556677889900112233445566778899001122334455667788990011221122334455667788D9900r11i22v3344e55r6677w8899i00t11h223334455-66S77t8899a00t11e2211O2233u4455t66p7788u99t0011s22

Maximum Ratings

(Above which the useful life may be impaired. For user guidelines, not tested.)

Supply voltage range, VCC ............................................................................................ –0.5V to +4.6V

Input voltage range, VI .................................................................................................... –0.5V to +4.6V

Voltage range applied to any output in the

high-impedance or power-off state, VO(1) ............................................................ –0.5V to +4.6V

Voltage range applied to any output in the

high or low state, VO(1,2) ........................................................................................ –0.5V to VCC +0.5V

Input clamp current, IIK (VI <0) ............................................................................ –50mA

Output clamp current, IOK (VO <0) ...................................................................... –50mA

Continuous output current, IO ...................................................................................................... ±50mA

Continuous current through each VCC or GND ................................................. ±100mA

Package thermal impedance, θJA(3): package A .................................................... 64°C/W

package K ................................................... 48°C/W

Note:

Stresses greater than those listed under MAXIMUM

RATINGS may cause permanent damage to the

device. This is a stress rating only and functional

operation of the device at these or any other

conditions above those indicated in the opera-

tional sections of this specification is not implied.

Exposure to absolute maximum rating conditions

for extended periods may affect reliability.

Storage Temperature range, Tstg .............................................................................. –65°C to 150°C

Notes:

1. Input & output negative-voltage ratings may be exceeded if the input and output curent rating are observed.

2. Output positive-voltage rating may be exceeded up to 4.6V maximum if theoutput current rating is observed.

3. The package thermal impedance is calculated in accordance with JESD 51.

Recommended Operating Conditions(1)

Min.

Max.

Units

VCC Supply Voltage

Operating

Data retention only

1.65

3.6

1.2

VCC = 1.2V

VCC

VIH High-level Input Voltage

VIL Low-level Input Voltage

VI Input Voltage

VO Output Voltage

VCC = 1.65V to 1.95V

VCC = 2.3V to 2.7V

VCC = 3V to 3.6V

VCC = 1.2V

VCC = 1.65V to 1.95V

VCC = 2.3V to 2.7V

VCC = 3V to 3.6V

Active State

3-State

0.65 x VCC

1.7

2

Gnd

V

0.35 x VCC

0.7

0.8

0

3.6

0

VCC

0

3.6

IOH High-level output current

IOL Low-level output current

VCC = 1.65V to 1.95V

VCC = 2.3V to 2.7V

VCC = 3V to 3.6V

VCC = 1.65V to 1.95V

VCC = 2.3V to 2.7V

VCC = 3V to 3.6V

–6

– 12

– 24

mA

6

12

24

∆t∆v Input transition rise or fall rate

TA Operating free-air temperature

VCC = 1.65V to 3.6V

5

ns/V

–40

85

°C

Notes:

1. All unused inputs must be held at VCC or GND to ensure proper device operation.

3

PS8511A

02/06/01

Share Link: