PI74AVC16836 データシートの表示（PDF） - Pericom Semiconductor
部品番号
コンポーネント説明
メーカー
PI74AVC16836 Datasheet PDF : 11 Pages
| |||
PI74AVC+16836
2.5V 20-Bit Universal Bus
1122334455667788990011223344556677889900112233445566778899001122112233445566778899001122334455667788990011223344556677889900112211223344556677889900112233445566778899001122334455667788990011221122334455667788D9900r11i22v3344e55r6677w8899i00t11h223334455-66S77t8899a00t11e2211O2233u4455t66p7788u99t0011s22
Maximum Ratings
(Above which useful life may be impaired. For user guidelines, not tested.)
Supply voltage range, VCC ............................................ –0.5V to +4.6V
Input voltage range, VI .................................................. –0.5V to +4.6V
Voltage range applied to any output in the
high-impedance or power-off state, VO(1) ................... –0.5V to +4.6V
Voltage range applied to any output in the
high or low state, VO(1,2) ....................................... –0.5V to VCC+0.5V
Input clamp current, IIK (VI <0) ................................................... –50mA
Output clamp current, IOK(VO <0) .............................................. –50mA
Continuous output current, IO ................................................... ±50mA
Continuous current through each VCC or GND ........................ ±100mA
Package thermal impedance, θJA(3): package A ........................ 64°C/W
package K ........................ 48°C/W
Storage Temperature range, Tstg .................................... –65°C to 150°C
Note:
Stresses greater than those listed under MAXIMUM
RATINGS may cause permanent damage to the device.
This is a stress rating only and functional operation of the
device at these or any other conditions above those
indicated in the operational sections of this specification
is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect reliability.
Notes:
1. Input & output negative-voltage ratings may be exceeded
if the input and output curent rating are observed.
2. Outputpositive-voltageratingmaybeexceededupto4.6V
maximum if theoutput current rating is observed.
3. The package thermal impedance is calculated in accor-
dance with JESD 51.
Recommended Operating Conditions(1)
VCC Supply Voltage
Operating
Data retention only
VIH High-level Input Voltage
VCC = 1.2V
VCC = 1.65V to 1.95V
VCC = 2.3V to 2.7V
VCC = 3V to 3.6V
VIL Low-level Input Voltage
VCC = 1.2V
VCC = 1.65V to 1.95V
VCC = 2.3V to 2.7V
VCC = 3V to 3.6V
VI Input Voltage
VO Output Voltage
Active State
3-State
IOH High-level output current
VCC = 1.65V to 1.95V
VCC = 2.3V to 2.7V
VCC = 3V to 3.6V
IOL Low-level output current
VCC = 1.65V to 1.95V
VCC = 2.3V to 2.7V
VCC = 3V to 3.6V
∆t∆v Input transition rise or fall rate
VCC = 1.65V to 3.6V
TA Operating free-air temperature
Notes:
1. All unused inputs must be held at VCC or GND to ensure proper device operation.
Min.
1.65
1.2
VCC
0.65 x VCC
1.7
2
0
0
0
–40
Max.
3.6
Gnd
0.35 x VCC
0.7
0.8
3.6
VCC
3.6
–6
– 12
– 24
6
12
24
5
85
Units
V
mA
ns/V
°C
3
PS8511C 09/22/04
Share Link: 