PT6314-001L データシートの表示（PDF） - Princeton Technology
部品番号
コンポーネント説明
メーカー
PT6314-001L Datasheet PDF : 49 Pages
| |||
Dot Character VFD Controller/Driver IC
Tel: 886-2-66296288
Fax: 886-2-29174598
URL: http://www.princeton.com.tw
PT6314
Symbol
A
A1
A2
b
D
D1
e
E
E1
θ
θ1
θ2
θ3
C
L
L1
R1
R2
S
ccc
Min.
-
0.05
1.35
0.17
0o
0o
11 o
11 o
0.09
0.45
0.08
0.08
0.20
Nom.
-
-
1.40
0.22
22.00 BSC.
20.00 BSC.
0.50 BSC.
22.00 BSC.
20.00 BSC.
3.5 o
-
12 o
12 o
-
0.60
1.00 REF.
-
-
-
0.08
Max.
1.60
0.15
1.45
0.27
7o
-
13 o
13 o
0.20
0.75
-
0.20
-
Notes:
1. Controlling Dimensions are in millimeters.
2. Dimensioning and tolerancing per ASME Y14.5M-1994.
3. The top packge body size may be smaller than the bottom package size by as much as 0.15mm.
4. Datums A-B and D to be determined at datum plane H.
5. Dimensions D1 and E1 do not include mold protrusion. Allowable protrusion is 0.25 mm per side. D1
and E1 are maximum plastic body size dimensions including mold mismatch.
6. Details of pin1 identifier are optional but must be located within the zone indicated.
7. Dimension b does not include dambar protrusion. Allowable dambar protrusion shall not cause the
lead to exceed the maximum b dimension by more than 0.08mm. Dambar cannot be located on the
lower radius or the foot. Minimum space between protrusion and an adjacent lead is 0.07mm for
0.4mm and 0.5mm pitch packages.
8. A1 is defined as the distance from the seating plane to the lowest point on the package body.
9. Refer to JEDEC STD MS-026 Variation BFB
JEDEC is the trademark of JEDEC SOLID STATE TECHNOLOGY ASSOCIATION
PT6314 V1.3
- 49 -
March, 2006
Share Link: 