LH28F800SU データシートの表示（PDF） - Sharp Electronics
部品番号
コンポーネント説明
メーカー
LH28F800SU Datasheet PDF : 38 Pages
| |||
8M (512K × 16, 1M × 8) Flash Memory
LH28F800SU
ELECTRICAL SPECIFICATIONS1
Absolute Maximum Ratings*
Temperature under bias ......................... 0°C to +80°C
Storage temperature ......................... -65°C to +125°C
*WARNING: Stressing the device beyond the “Abso-
lute Maximum Ratings” may cause permanent dam-
age. These are stress ratings only. Operation beyond
the “Operating Conditions” is not recommended and
extended exposure beyond the “Operating Conditions”
may affect device reliability.
VCC = 3.3 V ± 0.3 V Systems4
SYMBOL
PARAMETER
TA Operating Temperature, Commercial
VCC VCC with Respect to GND
VPP VPP Supply Voltage with Respect to GND
V
Voltage on any Pin (Except VCC, VPP)
with Respect to GND
I
Current into any Non-Supply Pin
IOUT Output Short Circuit Current
MIN.
0
-0.2
-0.2
-0.5
MAX.
70
7.0
7.0
UNITS TEST CONDITIONS NOTE
°C Ambient Temperature 1
V
2
V
2
VCC + 0.5 V
2
±30
mA
100.0
mA
3
VCC = 5.0 V ± 0.5 V Systems4
SYMBOL
PARAMETER
MIN. MAX. UNITS TEST CONDITIONS NOTE
TA Operating Temperature, Commercial
0
70
VCC VCC with Respect to GND
-0.2
7.0
VPP VPP Supply Voltage with Respect to GND -0.2
7.0
V
Voltage on any Pin (Except VCC, VPP)
with Respect to GND
-0.5
7.0
°C Ambient Temperature 1
V
2
V
2
V
2
I
Current into any Non-Supply Pin
±30
mA
IOUT Output Short Circuit Current
100.0 mA
3
NOTES:
1. Operating temperature is for commercial product defined by this specification.
2. Minimum DC voltage is -0.5 V on input/output pins. During transitions, this level may undershoot to -2.0 V for periods < 20 ns.
Maximum DC voltage on input/output pins is VCC + 0.5 V which, during transitions, may overshoot to VCC + 2.0 V for periods < 20 ns.
3. Output shorted for no more than one second. No more than one output shorted at a time.
4. AC specifications are valid at both voltage ranges. See DC Characteristics tables for voltage range-specific specifications.
15
Share Link: 