DESCRIPTION (continued)
The character set consists of 128 special ASCII characters for
English, German, Italian, Swedish, Danish, and Norwegian.
All products are 100% burned-in and tested, then subjected to
out-going AQL’s of .25% for brightness matching, visual align-
ment and dimensions, .065% for electrical and functional.
Maximum Ratings
DC Supply Voltage .........................................–0.5 V to +7.0 Vdc
Input Voltage, Respect to GND
(all inputs)............................................–0.5 V to VCC +0.5 Vdc
Operating Temperature .....................................–40°C to +85°C
Storage Temperature.......................................–40°C to +100°C
Relative Humidity at 85°C ...................................................85%
Maximum Solder Temperature, 0.063" (1.59 mm)
below Seating Plane, t<5.0 s ........................................ 260°C
Optical Characteristics
Spectral Peak Wavelength
Red ...................................................................... 660 nm typ.
HER ..................................................................... 635 nm typ.
Green .................................................................. 565 nm typ.
Yellow .................................................................. 585 nm typ.
Digit Height......................................................0.180" (4.57 mm)
Time Averaged Luminous Intensity (1)
at VCC=5.0 V
Red................................................................50 µcd/LED min.
HER/Yellow ...................................................60 µcd/LED min.
Green ............................................................75 µcd/LED min.
LED to LED Intensity Matching, VCC=5.0 V ........... 1.8:1.0 max.
Viewing Angle (off normal axis)
Horizontal ...............................................................±50° max.
Vertical ...................................................................±75° max.
Note:
1) Peak luminous intensity values can be calculated by multiplying
these values by 7.
Figure 1. Top View
14 13 12 11 10 9 8
Pin Function
Pin Function
1
WR Write
2
A1 Digit Select
3
A0 Digit Select
4
VCC
5
D0 Data
6
D1 Data
7
D2 Data
Pin Function
8
D3 Data
9
D4 Data
10
D5 Data
11
D6 Data
12
BL Display Blank
13
CLR Clear
14
GND
Figure 2. Timing Characteristics—Write Cycle Waveforms
A0 – A1
CLR
TAS
D0 – D6
WR
TDS
TW
TACC
2.0 V
0.8 V
TAH
2.0 V
0.8 V
TDH
2.0 V
0.8 V
Digit3 Digit2 Digit1 Digit0
1234567
DC Characteristics at 25°C
Parameters
Min.
VCC
4.5
ICC Blank
—
ICC (80 dots on)
—
VIL (all inputs)
—
VIH (all inputs)
2.0
IIL (all inputs)
25
Typ.
5.0
2.3
80
—
—
—
Max.
5.5
3.0
105
0.8
—
100
2000 Infineon Technologies Corp. • Optoelectronics Division • San Jose, CA
www.infineon.com/opto • 1-888-Infineon (1-888-463-4636)
OSRAM Opto Semiconductors GmbH & Co. OHG • Regensburg, Germany
www.osram-os.com • +49-941-202-7178
Units
V
mA
mA
V
V
µA
2
Conditions
—
VCC=5.0 V
VCC=5.0 V
4.5 V <VCC <5.5 V
4.5 V <VCC <5.5 V
4.5 V <VCC <5.5 V, VIN=0.8 V
SLR/SLO/SLG/SLY2016
March 23, 2000-01