SMP100LC
Ordering information scheme
Figure 17. Test circuit 3 for dynamic IH parameter
R
Surge generator
VBAT = - 48 V
D.U.T
This is a GO-NOGO test which allows to confirm the holding current (IH) level in a
functional test circuit.
TEST PROCEDURE
1/ Adjust the current level at the IH value by short circuiting the AK of the D.U.T.
2/ Fire the D.U.T. with a surge current ➔ IPP = 10A, 10/1000µs.
3/ The D.U.T. will come back off-state within 50ms maximum.
3
Ordering information scheme
Trisil Surface Mount
Repetitive Peak Pulse Current
100 = 100A
Capacitance
LC = Low Capacitance
Voltage
65 = 65V
SMP 100 LC - xxx
9/12