SMP100MC
Figure 12: Test circuit 3 for dynamic IH parameter
R
VBAT = - 48 V
D.U.T
Surge generator
This is a GO-NOGO test which allows to confirm the holding current (IH) level in a
functional test circuit.
TEST PROCEDURE
1/ Adjust the current level at the IH value by short circuiting the AK of the D.U.T.
2/ Fire the D.U.T. with a surge current ➔ IPP = 10A, 10/1000µs.
3/ The D.U.T. will come back off-state within 50ms maximum.
Figure 13: Order Code
Trisil Surface Mount
Repetitive Peak Pulse Current
100 = 100A
Capacitance
MC = Micro Capacitance
Voltage
270 = 270V
SMP 100 MC - xxx
8/10