ST7528
1.5V
1.6V
1.7V
1.8V
1.9V
2.0V
2.1V
2.2V
2.3V
Reversion History
2004/6/29
2004/7/21
2004/10/12
2004/11/26
2005/01/18
2005/10/05
2005/10/20
2005/12/22
2005/12/27
80,68,IIC Timing character definition
Modify Application Note VDD, VSS routing
Add Timing parameter , tF and tR
l Modify Vout Max limitation from 15V to 18V
l Add VEXT using range (2.0V~3.3V)
l Modify Frame rate frequency typical and Max/Min value.
l Modify 3FRC/4FRC setting description (page 33).
l Add description about the Panel Size large than 1.6”, the VOP can not set
over 12 voltage.
l Add description about IIC interface can not use with other IIC slaver device.
l Modify page 29, 30 key error.
l Change “partial display duty ratio” to “select partial display line”.
l Add description on instruction of Frame Frequency to suitable for no partial
display.
l Add release bias power save instruction.
l Remove page-3 “PAD NO 352 ~ 353: 913 um PAD NO 229 ~ 230: 84 um“.
l Change VDD1 to VDD.
Modify E_RD , RW_WR , Pin description, and add VR,VEXT ITO resister limitation.
Modify PAD Coordinates.
l Add DS1.DS0 recommended setting.
l Modify ADC description mistake.
Ver2.3
97/97
2007/1/3