STA32613TR データシートの表示（PDF） - STMicroelectronics
部品番号
コンポーネント説明
メーカー
STA32613TR Datasheet PDF : 43 Pages
| |||
STA326
7.5.2 De-Emphasis
BIT
R/W
RST
1
R/W
0
NAME
DEMP
DESCRIPTION
De-emphasis:
0 – No De-emphasis
1 – De-emphasis
By setting this bit to HIGH, or one (1), de-emphasis will implemented on all channels. DSPB (DSP Bypass,
Bit D2, CFA) bit must be set to 0 for De-emphasis to function.
7.5.3 DSP Bypass
BIT R/W RST
2
R/W
0
NAME
DSPB
DESCRIPTION
DSP Bypass Bit:
0 – Normal Operation
1 – Bypass of EQ and Mixing Functionality
Setting the DSPB bit bypasses all the EQ and Mixing functionality of the STA326 Core.
7.5.4 Post-Scale Link
BIT R/W RST
3
R/W
0
NAME
PSL
DESCRIPTION
Post-Scale Link:
0 – Each Channel uses individual Post-Scale value
1 – Each Channel uses Channel 1 Post-Scale value
Post-Scale functionality is an attenuation placed after the volume control and directly before the conver-
sion to PWM. Post-Scale can also be used to limit the maximum modulation index and therefore the peak
current. A setting of 1 in the PSL register will result in the use of the value stored in Channel 1 post-scale
for all three internal channels.
7.5.5 Biquad Coefficient Link
BIT R/W RST
NAME
DESCRIPTION
4
R/W
0
BQL
Biquad Link:
0 – Each Channel uses coefficient values
1 – Each Channel uses Channel 1 coefficient values
For ease of use, all channels can use the biquad coefficients loaded into the Channel 1 Coefficient RAM
space by setting the BQL bit to 1. Therefore, any EQ updates only have to be performed once.
7.5.6 Dynamic Range Compression/Anti-Clipping Bit
BIT R/W RST
NAME
DESCRIPTION
5 R/W 0
DRC
Dynamic Range Compression/Anti-Clipping
0 – Limiters act in Anti-Clipping Mode
1 – Limiters act in Dynamic Range Compression Mode
Both limiters can be used in one of two ways, anti-clipping or dynamic range compression. When used in
anti-clipping mode the limiter threshold values are constant and dependent on the limiter settings. In dy-
namic range compression mode the limiter threshold values vary with the volume settings allowing a night-
time listening mode that provides a reduction in the dynamic range regardless of the volume level.
7.5.7 Zero-Detect Mute Enable
BIT
R/W
RST
NAME
DESCRIPTION
6
R/W
1
ZDE
Zero-Detect Mute Enable: Setting of 1 enables the automatic zero-
detect mute
Setting the ZDE bit enables the zero-detect automatic mute. When ZDE=1, the zero-detect circuit looks
17/43
Share Link: 