STG3699B(2006) データシートの表示（PDF） - STMicroelectronics
部品番号
コンポーネント説明
メーカー
STG3699B
(Rev.:2006)
(Rev.:2006)
STMicroelectronics
STG3699B Datasheet PDF : 19 Pages
| |||
STG3699B
2 Maximum Rating
2 Maximum Rating
Note:
Stressing the device above the rating listed in the “Absolute Maximum Ratings” table may
cause permanent damage to the device. These are stress ratings only and operation of the
device at these or any other conditions above those indicated in the Operating sections of this
specification is not implied. Exposure to Absolute Maximum Rating conditions for extended
periods may affect device reliability. Refer also to the STMicroelectronics SURE Program and
other relevant quality documents.
Table 3. Absolute Maximum Ratings
Symbol
Parameter
Value
Unit
VCC Supply Voltage
-0.5 to 5.5
V
VI
DC Input Voltage
-0.5 to VCC + 0.5
V
VIC
DC Control Input Voltage
-0.5 to 5.5
V
VO
DC Output Voltage
-0.5 to VCC + 0.5
V
IIKC
DC Input Diode Current on control pin (VIN < 0V)
− 50
mA
IIK
DC Input Diode Current (VIN< 0V)
± 50
mA
IOK
DC Output Diode Current
± 20
mA
IO
DC Output Current
± 300
mA
IOP
DC Output Current Peak (pulse at 1ms, 10% duty cycle)
± 500
mA
ICC or IGND DC VCC or Ground Current
± 100
mA
PD
Power Dissipation at TA = 70°C (1)
1120
mW
TSTG Storage Temperature
-65 to 150
°C
TL
Lead Temperature (10 sec)
300
°C
1. Derate above 70°C: by 18.5mW/°C.
Absolute maximum ratings are those values above which damage to the device may occur.
Functional operation under these conditions is not implied. All voltages are referenced to GND.
Table 4. Recommended Operating Conditions
Symbol
Parameter
Value
Unit
VCC
VI
VIC
VO
TOP
dt/dv
Supply Voltage (Truth Table guaranteed: 1.2 to 4.3V)
Input Voltage
Control Input Voltage
Output Voltage
Operating Temperature
Input rise and Fall Time Control Input VCC=1.65V to 2.7V
VCC=3.0 to 4.3V
1.65 to 4.3
0 to VCC
0 to 4.3
0 to VCC
–55 to 125
0 to 20
0 to 10
V
V
V
V
°C
ns/V
5/19
Share Link: