NXP Semiconductors
TEA1733AT
GreenChip SMPS control IC
Table 5. Characteristics …continued
Tamb = 25 °C; VCC = 20 V; all voltages are measured with respect to ground (pin 2); currents are positive when flowing into
the IC; unless otherwise specified.
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
tleb
leading edge blanking
time
250
300
350
ns
Overpower compensation (pin VINSENSE and pin ISENSE)
Iopc(ISENSE)
overpower
compensation current on
pin ISENSE
VVINSENSE = 1 V;
Vsense(max) > 400 mV
VVINSENSE =3 V;
Vsense(max) > 400 mV
Soft start (pin ISENSE)
-
0.28
-
μA
-
1.7
-
μA
Istart(soft)
Vstart(soft)
soft start current
soft start voltage
VCTRL = 4 V; enable
voltage
−63
−55
−47
μA
-
Vsense(max) -
V
Rstart(soft)
soft start resistance
Driver (pin DRIVER)
12
-
-
kΩ
Isource(DRIVER)
source current on pin
DRIVER
VDRIVER = 2 V
-
−0.3
−0.25 A
Isink(DRIVER)
VO(DRIVER)max
sink current on pin
DRIVER
VDRIVER = 2 V
VDRIVER = 10 V
maximum output voltage
on pin DRIVER
0.25
0.3
0.6
0.75
9
10.5
-
A
-
A
12
V
Temperature protection
Tpl(IC)
IC protection level
temperature
130
140
150
°C
[1] The clamp voltage on the PROTECT pin is lowered when the IC is in power-down (latched or restart protection).
TEA1733AT
Preliminary data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 19 November 2010
© NXP B.V. 2010. All rights reserved.
12 of 18