TS39100CP15 PDF VIEW DOWNLOAD, TS39100CP15 データシート

TS39100CP15 データシートの表示（PDF） - TSC Corporation

部品番号

コンポーネント説明

メーカー

TS39100CP15

1A Ultra Low Dropout Voltage Regulator with Multi-Function

TSC Corporation

TS39100CP15 Datasheet PDF : 13 Pages

1 2 3 4 5 6 7 8 9 10 Next Last

TS39100/1/2/3/4/5

1A Ultra Low Dropout Voltage Regulator

with Multi-Function

Electrical Characteristics (continues)

Reference (TS39102 / 3/ 4)

Reference Voltage

(Note 7)

0.980|Vo| 1.24 1.020|Vo|

0.970|Vo|

1.030|Vo|

Adjust Pin Bias Current

Reference Voltage Temp. Coefficient

Adjust Pin Bias Current Temp. Coefficient

(Note 8)

120

ppm/ oC

0.1

nA/ oC

Flag Output (TS39101/3)

Output Leakage Current

Output Low Voltage (Note 9)

Upper Threshold Voltage

Lower Threshold Voltage

Hysteresis

VOH=16V

VIN=0.9 * VOUT, IOL=250uA

% of VOUT

400

Enable Input (TS39101 / 2 / 3 / 4 / 5)

Input Logic Voltage

Enable Pin Input Current

Low (OFF)

High (ON)

VEN =2.25V

VEN =0.8V

0.8

2.25

Thermal Performance

Condition

Package type

Typ

Unit

Thermal Resistance

Junction to Case

SOT-223

SOP-8

TO-252 / TO-252-5L

oC/W

Note 1: Absolute Maximum Rating is limits beyond which damage to the device may occur. For guaranteed

specifications and test conditions see the Electrical Characteristics.

Note 2: The device is not guaranteed to operate outside its operating rating.

Note 3: Devices are ESD sensitive. Handling precautions recommended.

Note 4: The maximum allowable power dissipation is a function of the maximum junction temperature, TJ, the junction

to ambient thermal resistance, ӨJA, and the ambient temperature, Ta. Exceeding the maximum allowable

power dissipation will cause excessive die temperature, and the regulator will go into thermal shutdown. The

effective value of ӨJA can be reduced by using a heat sink, Pd(max) = (TJ(max) – Ta) / ӨJA.

Note 5: Dropout voltage is defined as the input to output differential at which the output voltage drops -1% below its

nominal value measured at 1V differential.

Note 6: Ground pin current is the regulator quiescent current. The total current drawn from the source is the sum of

the ground pin current and output load current, IGND = IIN - IOUT for fix output voltage, , IGND = IIN - IOUT +10mA

for fix reference output voltage in full load regulation.

Note 7: VREF ≤ VOUT ≤ (VIN – 1V), 2.25V ≤ VIN ≤ 16V, 10mA ≤ IL ≤ 1.0A.

Note 8: Output voltage temperature coefficient is ΔVOUT (worse cast) / (TJ(max) – TJ(MIN)) where is TJ(max) +125oC and

TJ(MIN) is 0oC.

Note 9: For adjustable device and fixed device with VOUT > 2.25V.

3/13

Version: B07

Share Link: