DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

UPD750064CU-XXX データシートの表示(PDF) - NEC => Renesas Technology

部品番号
コンポーネント説明
メーカー
UPD750064CU-XXX
NEC
NEC => Renesas Technology NEC
UPD750064CU-XXX Datasheet PDF : 82 Pages
First Prev 21 22 23 24 25 26 27 28 29 30 Next Last
µPD750064, 750066, 750068, 750064(A), 750066(A), 750068(A)
6. PERIPHERAL HARDWARE FUNCTION
6.1 Port
The following three types of I/O ports are available.
• CMOS input (PORT0, 1, 11)
: 12
• CMOS input/output (PORT2, 3, 6)
: 12
• N-ch open-drain input/output (PORT4, 5) : 8
Total
32
Table 6-1. Types and Features of Digital Ports
Port Name
Function
Operation and Features
Remarks
PORT0 4-bit input
When the serial interface function is used, the alternate-function Also used for the INT4, SCK,
pins function as output ports depending on the operation mode. SO/SB0, SI/SB1 pins.
PORT1
4-bit input only port.
Also used for the INT0 to
INT2/TI1, TI0 pins.
PORT2 4-bit input/output Can be set to input mode or output mode in 4-bit units.
Also used for the PTO0,
PTO1, PCL, BUZ pins.
PORT3
Can be set to input mode or output mode in 1-bit units.
PORT4
PORT5
4-bit input/output
(N-ch open drain,
13 V withstand
voltage)
Can be set to input mode or output
mode in 4-bit units. On-chip pull-up
resistor can be specified in 1-bit
units by mask option.
Ports 4 and 5 are paired
and data can be input/
output in 8-bit units.
PORT6 4-bit input/output Can be set to input mode or output mode in 1-bit units.
Also used for the KR0 to
KR3, AN4 to AN7 pins.
PORT11 4-bit input
4-bit input only port.
Also used for the AN0 to
AN3 pins.
6.2 Clock Generator
The clock generator generates clocks which are supplied to the peripheral hardware in the CPU. Figure 6-1
shows the configuration of the clock generator.
Operation of the clock generator is determined by the processor clock control register (PCC) and system clock
control register (SCC).
Two types of system clocks are available; main system clock and subsystem clock.
The instruction execution time can be changed.
• 0.95 µs, 1.91 µs, 3.81 µs, 15.3 µs (@ 4.19-MHz operation with main system clock)
• 0.67 µs, 1.33 µs, 2.67 µs, 10.7 µs (@ 6.0-MHz operation with main system clock)
• 122 µs (@ 32.768-kHz operation with subsystem clock)
Data Sheet U10165EJ2V0DS00
23

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]