µPD750104, 750106, 750108, 750104(A), 750106(A), 750108(A)
PROM programming tools
Hardware
Software
PG-1500
PA-75P008CU
PG-1500 controller
The PG-1500 PROM programmer is used together with an accessory board and optional
program adapter. It allows the user to program a single chip microcontroller containing
PROM from a standalone terminal or a host machine. The PG-1500 can be used to
program typical 256K-bit to 4M-bit PROMs.
The PA-75P008CU is a PROM programmer adapter provided for the µPD75P0116CU/GB.
It is used in conjunction with the PG-1500.
This program enables the host machine to control the PG-1500 through the serial and
parallel interfaces.
Host machine
PC-9800 series
IBM PC/AT and
compatibles
OS
Distribution media
MS-DOS
Ver. 3.30
to
Ver. 6.2Note
3.5-inch 2HD
5.25-inch 2HD
See "OS for IBM PC." 3.5-inch 2HD
5.25-inch 2HC
Part number
µS5A13PG1500
µS5A10PG1500
µS7B13PG1500
µS7B10PG1500
Note These software products cannot use the task swap function, which is available in MS-DOS Ver. 5.00 or
later.
Remark Operation of the PG-1500 controller is guaranteed only on the above host machines and OSs.
74