W91330N SERIES
FUNCTIONAL DESCRIPTION
Keyboard Operation
C1
C2
1
2
4
5
7
8
∗/T
0
R/P2 R
C3 C4
3
R1
6
F1 R2
9
F2 R3
# R/P1 R4
F3
F4 VX
• R: One-key redial function
• R/P1, R/P2: Redial and pause function key, P1 is 3.6 sec. and P2 is 2.0 sec.
• ∗/T: ∗ in tone mode and P→T in pulse mode
• F1, ..., F4: Flash keys, F1 = 600 mS, F2 = 100 mS, F3 = 300 mS, F4 = 73 mS
Notes: D1, ..., Dn, D1', ..., Dn': 0, ..., 9, */T, #
R/P: R/P1 or R/P2.
Fn: F1, ..., F4
Normal Dialing
OFF HOOK (or ON HOOK & HFI ¡õ ), D1 , D2 , ..., Dn
1. D1, D2, ..., Dn will be dialed out.
2. Dialing length is unlimited, but redial is inhibited if length oversteps 32 digits in normal dialing.
Redialing
OFF HOOK (or ON HOOK & HFI ¡õ
), D1 , D2 , ..., Dn Busy,
Come ON HOOK , OFF HOOK (or ON HOOK & HFI ¡õ ), R/P
• The redial memory content will be dialed out.
• The R/P key can execute the redial function only as the first key-in after off-hook; otherwise, it
executes pause function.
• If redialing length oversteps 32 digits, the redialing function will be inhibited.
OFF HOOK (or ON HOOK & HFI ¡õ ), D1 , D2 , ..., Dn Busy, R
• The one-key redialing function timing diagram is shown in Figure 4.
• If the dialing of D1 to Dn is finished, pressing the R key will cause the pulse output pin to
go low for 2.2 seconds break time and 0.6 seconds pause time will automatically be added.
-6-