DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

LR38603 データシートの表示(PDF) - Sharp Electronics

部品番号
コンポーネント説明
メーカー
LR38603 Datasheet PDF : 26 Pages
First Prev 21 22 23 24 25 26
Electronic exposure control data =
[{Weighted data 1 q x (64 – CW_E (address 13h))
+ Weighted data 2 w x CW_E}/64
x (256 – P_HEE (address 17h) – P_LEE (address 18h))
+ Top level e x P_HEE + Bottom level r x
P_LEE]/256
Y11 Y12 Y13 Y14 Y15 Y16 Y17 Y18
Y21 Y22 Y23 Y24 Y25 Y26 Y27 Y28
Y31 Y32 Y33 Y34 Y35 Y36 Y37 Y38
Y41 Y42 Y43 Y44 Y45 Y46 Y47 Y48
Y51 Y52 Y53 Y54 Y55 Y56 Y57 Y58
Y61 Y62 Y63 Y64 Y65 Y66 Y67 Y68
Y71 Y72 Y73 Y74 Y75 Y76 Y77 Y78
Y81 Y82 Y83 Y84 Y85 Y86 Y87 Y88
q Weighted data 1
This comes from the following equation weighting in
horizontal.
Weighting factors are the data from UW_E1
(address 0Bh) to UW_E8 (address 12h).
Weighted data 1 =
{(Y11 + Y12 + π + Y18)/8 x UW_E1 (address 0Bh)
+ (Y21 + Y22 + π + Y28)/8 x UW_E2 (address 0Ch)
:
+ (Y81 + Y82 + π + Y88)/8 x UW_E8 (address
12h)}/256
The sum from UW_E1 to UW_E8 shall be 256.
w Weighted data 2
Weighting area can be set by the data of CWP_E
(address 14h), CWA_E (address 15h).
Weighting position can be set by the data of
CWP_E.
Weighting area size can be set by the data of
CWA_E.
Weighted data come from averaged data in chosen
area.
LR38603
e Top level : The highest luminance data in one
image by averaging either 4 pixels
or 8 pixels in horizontal.
r Bottom level : The lowest luminance data in
one image by averaging either 4
pixels or 8 pixels in horizontal.
Auto White Balance Control
If white balance control data are less than the data
of AWB_IW_S and AWB_QW_S (address 40h),
then AWB stops.
If white balance control data are less than the data
of AWB_IW_L (address 3Eh) and AWB_QW_L
(address 3Fh) AWB is made active so that white
balance control data are less than the data of
AWB_IW_S and AWB_QW_S.
When the data are greater than AWB_IW_L and
AWB_QW_L, AWB will be active again.
White balance data come from the following
equation using averaged I and Q data of 16 areas
in one image.
I11
I12
I13
I14
I21
I22
I23
I24
I31
I32
I33
I34
I41
I42
I43
I44
Q11
Q12
Q13
Q14
Q21
Q22
Q23
Q24
Q31
Q32
Q33
Q34
Q41
Q42
Q43
Q44
White balance data =
{Weighted data 3 q x (64 – CW_IQ (address 33h))
+ weighted data 4 w x CW_IQ}/64
21

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]