ACE24C02AFMT データシートの表示（PDF） - ACE Technology Co., LTD.

部品番号

コンポーネント説明

メーカー

ACE24C02AFMT

Two-wire Serial EEPROM

ACE Technology Co., LTD. 

Technology

ACE24C02A

Two-wire Serial EEPROM

Device Reset :

After an interruption in protocol power loss or system reset, any two-wire part can be protocol reset by following

these steps:

1. Clock up to 9 cycles.

2. Look for SDA high in each cycle while SCL is high and then.

3. Create a start condition as SDA is high

Bus Timing

Figure 2．SCL: Serial Clock, SDA: Serial Data I/O

Write Cycle Timing

Figure 3．SCL: Serial Clock, SDA: Serial Data I/O

Note: The write cycle time tWR is the time from a valid stop condition of a write sequence to the end of the internal clear/write

cycle.

VER 1.2 6

Share Link: