AD7751 データシートの表示（PDF） - Analog Devices

部品番号

コンポーネント説明

メーカー

AD7751

Energy Metering IC With On-Chip Fault Detection

Analog Devices 

AD7751

Pin No. Mnemonic

20

REVP

21

DGND

22

23, 24

CF

F2, F1

Description

This logic output will go logic high when negative power is detected, i.e., when the phase angle

between the voltage and current signals is greater that 90°. This output is not latched and will be

reset when positive power is once again detected. The output will go high or low at the same time as

a pulse is issued on CF.

This provides the ground reference for the digital circuitry in the AD7751, i.e., multiplier, filters

and digital-to-frequency converter. This pin should be tied to the analog ground plane of the PCB.

The digital ground plane is the ground reference for all digital circuitry, e.g., counters (mechanical

and digital), MCUs and indicator LEDs. For good noise suppression the analog ground plane

should only be connected to the digital ground plane at one point, e.g., a star ground.

Calibration Frequency Logic Output. The CF logic output gives instantaneous real power informa-

tion. This output is intended to be used for calibration purposes. Also see SCF pin description.

Low Frequency Logic Outputs. F1 and F2 supply average real power information. The logic outputs

can be used to directly drive electromechanical counters and two-phase stepper motors. See Transfer

Function section.

PIN CONFIGURATION

DIP and SSOP Packages

DVDD 1

AC/DC 2

AVDD 3

V1A 4

24 F1

23 F2

22 CF

21 DGND

V1B 5

20 REVP

AD7751

V1N 6 TOP VIEW 19 FAULT

V2N 7 (Not to Scale) 18 CLKOUT

V2P 8

17 CLKIN

RESET 9

16 G0

REFIN/OUT 10

15 G1

AGND 11

14 S0

SCF 12

13 S1

–6–

REV. A

Share Link: