CXA3010Q
Filter Frequency Response
The LPF characteristics are set to Chebyshev (1dB ripple) for 1.6M, 2M/inner track mode only, and to
Butterworth for the other modes. In addition, a custom selection can be made between Chebyshev (1dB ripple)
and Butterworth for the filter characteristics for 1.6M, 2M/inner track mode only; in that case, it is not possible
to change between 1.6M/inner track and 2M/inner track. As a result, the 1.6M and 2M characteristics and fc
ratio are identical.
B.P.F
Q = 0.577
(Differential characteristics)
fOB
1M/outer track, inner track
1.6M, 2M/outer track
L.P.F
Tertiary Butterworth
1.6M, 2M/inner track
L.P.F
Tertiary Chebyshev
1dBRp
(High-band noise cutoff)
fcn
(n = 1, 2, 3)
fc4
(Comprehensive characteristics)
fon
fo4
The BPF center frequency fOB is fixed at 1.2 times the LPF cutoff frequency.
fOB = 1.2fc
In the comprehensive characteristics, the relationship between the peak frequencies fo and fc is as follows,
depending on the differences of the LPF type:
Butterworth characteristics
fcn = 1.28fon (n = 1, 2, 3)
Chebyshev (1dB ripple characteristics) fc4 = 1.12fo4
– 18 –