HCNW4506-500 データシートの表示（PDF） - Avago Technologies

部品番号

コンポーネント説明

メーカー

HCNW4506-500

Intelligent Power Module and Gate Drive Interface Optocouplers

Avago Technologies 

2

Description

The HCPL-4506 and HCPL-0466

contain a GaAsP LED while the

HCPL-J456 and the HCNW4506

contain an AlGaAs LED. The LED

is optically coupled to an inte-

grated high gain photo detector.

Minimized propagation delay

difference between devices makes

these optocouplers excellent

solutions for improving inverter

efficiency through reduced

switching dead time.

An on chip 20 kΩ output pull-up

resistor can be enabled by

shorting output pins 6 and 7, thus

eliminating the need for an

external pull-up resistor in

common IPM applications.

Specifications and performance

plots are given for typical IPM

applications.

Selection Guide

Package

Type

Standard

8-Pin DIP

(300 Mil)

White Mold

8-Pin DIP

(300 Mil)

Small Outline

SO8

Widebody

(400 Mil)

Hermetic*

Part

Number

HCPL-4506

HCPL-J456

HCPL-0466

HCNW4506

HCPL-5300

HCPL-5301

IEC/EN/DIN VIORM = 630 Vpeak VIORM = 891 Vpeak VIORM = 560 Vpeak VIORM = 1414 Vpeak

—

EN 60747- (Option 060)

(Option 060)

5-2

Approval

*Technical data for these products are on separate Agilent publications.

Ordering Information

Specify Part Number followed by Option Number (if desired).

Example:

HCPL-4506#XXXX

020 = UL 5000 V rms/1 minute Option** for HCPL-4506 Only.

060 = IEC/EN/DIN EN 60747-5-2 Option** for HCPL-4506/0466.

300 = Gull Wing Lead Option for HCPL-4506/J456, HCNW4506.

500 = Tape and Reel Packaging Option

XXXE = Lead Free Option

Option data sheets are available. Contact Agilent sales representative or authorized distributor

for information.

**Combination of Option 020 and Option 060 is not available.

Remarks: The notation “#” is used for existing products, while (new) products launched since 15th July

2001 and lead free option will use “-”

Share Link: