MPC18730EPR2 データシートの表示（PDF） - Freescale Semiconductor

部品番号

コンポーネント説明

メーカー

MPC18730EPR2

Power Management IC with Five Regulated Outputs Programmed Through 3-Wire Serial Interface

Freescale Semiconductor 

ELECTRICAL CHARACTERISTICS

MAXIMUM RATINGS

ELECTRICAL CHARACTERISTICS

MAXIMUM RATINGS

Table 2. Maximum Ratings

All voltages are with respect to ground unless otherwise noted. Exceeding these ratings may cause a malfunction or

permanent damage to the device.

Ratings

Symbol

Value

Unit

ELECTRICAL RATINGS

Power Supply Voltage

Analog Signal Input (1)

Logic Signal Input

WAKE1~4B

CLEAR, SLEEP, EXT_CLOCK, SCKIN, DATA, STRB

VGATESEL1,2

Output Power Current

VOUT1 Power Supply Circuit (2)

VOUT2 Power Supply Circuit

SREG1 Power Supply Circuit

SREG2 Power Supply Circuit

SREG3 Power Supply Circuit

VGATE Power Supply Circuit

PGOOD1 Power Supply Circuit

Open-Drain Output Apply Voltage

PGOOD1

LSWO

ESD Voltage (3)

Human Body Model (HBM)

Machine Model (MM)

Charge Device Model (CDM)

THERMAL RATINGS

VBATT

-0.5 to 5.0

V

VINAN

-0.5 to VO1+0.5

V

V

VILRSTB

VILGC

VILGSEL

-0.5 to V_STDBY+0.5

-0.5 to VO1_SENSE+0.5

-0.5 to VBATT+0.5

mA

IOVO1

120

IOVO2

100

IOREG1

80

IOREG2

100

IOREG3

80

IOVG

8

IOPGOOD1

-20

V

VIODR

VIODV

-0.5 to 3.3

-0.5 to 3.3

V

VESD1

VESD2

VCDM

± 1500

± 200

± 750

Operating Temperature

Ambient

Junction

Storage Temperature

Thermal Resistance (4)

Junction to Ambient

TA

TJ

TSTG

RθJA

-10 to 65

150

-50 to 150

69

°C

°C

°C/W

Lead Soldering Temperature(5)

TSOLDER

260

°C

Notes

1. VREF, DMAX1, DMAX2, SREGC1, SREGC2, SREGC3 and RESET1_TH.

2. Includes the series pass power supply circuit output current

3. ESD testing is performed in accordance with the Human Body Model (HBM) (CZAP = 100 pF, RZAP = 1500 Ω), the Machine Model (MM)

(CZAP = 200 pF, RZAP = 0 Ω), and the Charge Device Model (CDM), Robotic (CZAP = 4.0pF).

4. Device mounted on a 2s2p test board, in accordance with JEDEC JESD51-6 and JESD51-7.

5. Pin soldering temperature limit is for 10 seconds maximum duration. Not designed for immersion soldering. Exceeding these limits may

cause malfunction or permanent damage to the device.

18730

6

Analog Integrated Circuit Device Data

Freescale Semiconductor

Share Link: