4300H4(2005) データシートの表示（PDF） - Bourns, Inc

部品番号

コンポーネント説明

メーカー

4300H4
(Rev.:2005)

HIGH HOLDING CURRENT BIDIRECTIONAL THYRISTOR OVERVOLTAGE PROTECTORS

Bourns, Inc 

TISP4xxxH4BJ Overvoltage Protector Series

Tape Dimensions

SMB Package Single-Sprocket Tape

MECHANICAL DATA

3.90 - 4.10

(.154 - .161)

1.95 - 2.05

(.077 - .081)

1.55 - 1.65

(.061 - .065)

1.65 - 1.85

(.065 - .073)

0.40

(.016)

MAX.

5.54 - 5.55

(.215 - .219)

11.70 - 12.30

(.461 - .484)

7.90 - 8.10

(.311 - .319)

Direction of Feed

Ø

1.50

(.059)

MIN.

Carrier Tape

Embossment

20°

0 MIN.

Cover

Tape

4.50

(.177)

MAX.

Maximium component

rotation

DIMENSIONS ARE: METRIC

(INCHES)

Index

Mark

Typical component

cavity center line

Typical component

center line

8.20

(.323)

MAX.

NOTES: A. The clearance between the component and the cavity must be within 0.05 mm (.002 in.) MIN. to 0.65 mm (.026 in.)

MAX. so that the component cannot rotate more than 20 ° within the determined cavity.

B. Taped devices are supplied on a reel of the following dimensions:-

Reel diameter: 330 ± 3.0 mm (12.99 ± .118 in.)

Reel hub diameter 75 mm (2.95 in.) MIN.

Reel axial hole: 13.0 ± 0.5 mm (.512 ± .020 in.)

C. 3000 devices are on a reel.

MDXXBJ

“TISP” is a trademark of Bourns, Ltd., a Bourns Company, and is Registered in U.S. Patent and Trademark Office.

“Bourns” is a registered trademark of Bourns, Inc. in the U.S. and other countries.

NOVEMBER 1997 - REVISED FEBRUARY 2005

Specifications are subject to change without notice.

Customers should verify actual device performance in their specific applications.

Share Link: