IT66121FN
16/20/24-bit YCbCr 4:2:2 with YC swap option
8/10/12-bit YCbCr 4:2:2 (CCIR-656)
BTA-T1004 format
DE-only interface
DDR option
Support HDMI1.4 3D feature
Frame packing mode up to 1080P@23.98/24Hz and 720P@59.94/60Hz
Top and Bottom up to 1080P@59.94/60Hz
Side-by-Side (Half) up to 1080P@59.94/60Hz
Side-by-Side (Full) up to 720P@59.94/60Hz
Bi-direction Color Space Conversion (CSC) between RGB and YCbCr color spaces with
programmable coefficients.
Digital audio input interface supporting
audio sample rate: 32~192 kHz
sample size: 16~24 bits
four I2S interfaces supporting 8-channel audio
S/PDIF interface supporting PCM, Dolby Digital, DTS digital audio transmission at up to
192kHz
Support for high-bit-rate (HBR) audio such as DTS-HD and Dolby TrueHD through the four I2S
interface or the S/PDIF interface, with frame rates as high as 768kHz
Compatible with IEC 60958 and IEC 61937
Software programmable HDMI output current, enabling user to optimize the performance for
fixed-cable systems or those with pre-defined cable length
MCLK input is optional for audio operation. Users could opt to implement audio input interface with
or without MCLK.
Integrated pre-programmed HDCP keys
Purely hardware HDCP engine increasing the robustness and security of HDCP operation
Monitor detection through Hot Plug Detection and Receiver Termination Detection
Embedded full-function pattern generator
Intelligent, programmable power management
Embedded hardware controlled CEC PHY
Ultra low power consumption, operation power is less than 70mw at 1080p@60Hz format.
64-pin (9x9 mm) QFN package
www.ite.com.tw
Nov-2011 Rev:0.99 3/39