AXT510224 データシートの表示（PDF） - Panasonic Corporation
部品番号
コンポーネント説明
メーカー
AXT510224 Datasheet PDF : 11 Pages
| |||
AXT5, 6
NOTES
1. For high resistance to drop impact
the F4 series is recommended.
2. Recommended PC board and metal
mask patterns
Connectors are mounted with high pitch
density, intervals of 0.35 mm, 0.4 mm or
0.5 mm.
In order to reduce solder and flux rise,
solder bridges and other issues make
sure the proper levels of solder is used.
The figures to the right are recommended
metal mask patterns. Please use them as
a reference.
• Socket (Mated height: 1.0 mm)
Recommended PC board pattern (TOP VIEW)
0.90±0.03
0.70±0.03
0.23±0.03
0.40±0.03
: Insulation area
Recommended metal mask pattern
Metal mask thickness: When 150µm
(Terminal opening ratio: 48%)
(Metal-part opening ratio: 100%)
0.90±0.01
0.70±0.01
• Header (Mated height: 1.0 mm)
Recommended PC board pattern (TOP VIEW)
0.80±0.03
0.45±0.03
0.23±0.03
0.40±0.03
: Insulation area
Recommended metal mask pattern
Metal mask thickness: When 150µm
(Terminal opening ratio: 48%)
(Metal-part opening ratio: 100%)
0.80±0.01
0.45±0.01
0.20±0.01
0.40±0.01
Recommended metal mask pattern
Metal mask thickness: When 120µm
(Terminal opening ratio: 60%)
(Metal-part opening ratio: 100%)
0.90±0.01
0.70±0.01
0.20±0.01
0.40±0.01
Recommended metal mask pattern
Metal mask thickness: When 120µm
(Terminal opening ratio: 60%)
(Metal-part opening ratio: 100%)
0.80±0.01
0.45±0.01
0.20±0.01
0.40±0.01
0.20±0.01
0.40±0.01
Please note that this inspection
connector cannot be connected to
standard models with a stacking
height of 1.2 mm (AXT5∗∗224 and
AXT6∗∗224).
Please contact our sales office for a
type connectable to models with a
stacking height of 1.2 mm.
Please refer to the latest product
specifications when designing your
product.
Panasonic Corporation Automation Controls Business Division industrial.panasonic.com/ac/e/
ACCTB29E 201303-T
Share Link: 