B59606 データシートの表示（PDF） - EPCOS AG
部品番号
コンポーネント説明
メーカー
B59606 Datasheet PDF : 27 Pages
| |||
Overcurrent protection
SMDs, EIA sizes 0603 and 1210, 24 V, 42 V, 63 V and 230 V
Many of the components presented in this data book are suitable for processing on automatic in-
sertion or placement machines. These thermistors can be supplied on tape for easy handling by
automatic systems. The individual modes of taping and packing will be described in the following.
1
Taping of SMD thermistors
1.1 Blister tape (to IEC 60286-3)
Figure 1
Dimension
(mm)
D0
D1
P0
P2
P1
W
E
F
G
8-mm tape
1.50
1.00
4.00
2.00
4.00
8.00
1.75
3.50
0.75
16-mm tape
1.50
1.50
4.00
2.00
12.00
16.00
1.75
7.50
0.75
Tolerance
(mm)
+ 0.10/0
min.
± 0.10 1)
± 0.05
± 0.10
± 0.30
± 0.10
± 0.05
min.
24-mm tape
1.50
1.50
4.00
2.00
16.00
24.00
1.75
11.50
0.75
Tolerance
(mm)
+ 0.10
+ 0.10
± 0.10
± 0.10
± 0.10
+ 0.30/0.1
± 0.10
± 0.10
min.
A0 x B0, K0, T2: The rated dimensions of the component compartment have been derived from the
relevant component specification and are chosen such that the components cannot change their
orientation within the tape.
1) ≤ 0.2 mm over 10 sprocket holes
Please read Cautions and warnings and
Important notes at the end of this document.
Page 10 of 27
Share Link: 