B59606 データシートの表示（PDF） - EPCOS AG

部品番号

コンポーネント説明

メーカー

B59606

PTC thermistors for overcurrent protection

EPCOS AG 

Overcurrent protection

SMDs, EIA sizes 0603 and 1210, 24 V, 42 V, 63 V and 230 V

Part orientation in tape pocket for blister tape

For chip thermistors case sizes 0805 and 1210

Figure 2

Additional taping information

For chip thermistors case sizes 0805 and 1210

Reel material

Tape material

Tape break force

Top cover tape strength

Top cover tape peel force

Tape peel angle

Cavity play

Polystyrol (PS)

Polystyrol (PS) or Polycarbonat (PC) or PVC

min. 10 N

min. 10 N

0.2 ... 0.6 N for 8-mm tape and 0.2 ... 0.8 N for 12-mm tape at

a peel speed of 300 mm/min

Angle between top cover tape and the direction of feed during

peel off: 165° ... 180°

Each part rests in the cavity so that the angle between the part

and cavity center line is no more than 20°

Please read Cautions and warnings and

Important notes at the end of this document.

Page 11 of 27

Share Link: