MKT469 データシートの表示（PDF） - Vishay Semiconductors
部品番号
コンポーネント説明
メーカー
MKT469 Datasheet PDF : 28 Pages
| |||
MKT467, MKT468, MKT469
Vishay BCcomponents
DC Film Capacitors
MKT Radial Lacquered Type
INSPECTION REQUIREMENTS
General Notes:
1. Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, Publication IEC 60384-2 and
Specific Reference Data”.
Group C Inspection Requirements
SUB-CLAUSE NUMBER AND TEST
SUB-GROUP C1A PART OF SAMPLE
OF SUB-GROUP C1
4.1
Dimensions (detail)
4.3.1 Initial measurements
4.3
Robustness of terminations
4.4
Resistance to soldering heat
4.14 Component solvent resistance
4.4.2 Final measurements
SUB-GROUP C1B PART OF SAMPLE
OF SUB-GROUP C1
4.6.1 Initial measurements
4.6
Rapid change of temperature
4.7
Vibration
4.7.2 Final inspection
CONDITIONS
PERFORMANCE REQUIREMENTS
Capacitance
Tangent of loss angle:
For C 470 nF at 100 kHz or
for C > 470 nF at 10 kHz
Tensile: Load 10 N; 10 s
Bending: Load 5 N; 4 x 90°
Method: 1A
Solder bath: 280 °C ± 5 °C
Duration: 10 s
Isopropylalcohol at room temperature
Method: 2
Immersion time: 5 min ± 0.5 min
Recovery time: Min. 1 h, max. 2 h
Visual examination
Capacitance
Tangent of loss angle
As specified in chapters “General Data” of
this specification
No visible damage
No visible damage
Legible marking
C/C| 2 % of the value measured initially
Increase of tan
0.005 for: C 100 nF or
0.010 for: 100 nF < C 220 nF or
0.015 for: 220 nF < C 470 nF and
0.003 for: C > 470 nF
Compared to values measured in 4.3.1
Capacitance
Tangent of loss angle:
For C 470 nF at 100 kHz or
for C > 470 nF at 10 kHz
A = - 55 °C
B = + 100 °C
5 cycles
Duration t = 30 min
Visual examination
Mounting:
See section “Mounting” of this specification
Procedure B4
Frequency range: 10 Hz to 55 Hz
Amplitude: 0.75 mm or
Acceleration 98 m/s²
(whichever is less severe)
Total duration 6 h
Visual examination
No visible damage
No visible damage
No visible damage
www.vishay.com
For technical questions, contact: dc-film@vishay.com
Document Number: 28105
74
Revision: 13-Dec-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Share Link: 