MKT467, MKT468, MKT469
Vishay BCcomponents
DC Film Capacitors
MKT Radial Lacquered Type
SUB-CLAUSE NUMBER AND TEST
4.12.1 Initial measurements
4.12.5 Final measurements
CONDITIONS
Capacitance
Tangent of loss angle:
For C 470 nF at 100 kHz or
for C > 470 nF at 10 kHz
Visual examination
Capacitance
Tangent of loss angle
SUB-GROUP C4
4.13 Charge and discharge
4.13.1 Initial measurements
4.13.3 Final measurements
Insulation resistance
10 000 cycles
Charged to URDC
Discharge resistance:
R
=
----------------------U----R-----------------------
C 2.5 dU dtR
Capacitance
Tangent of loss angle:
For C 470 nF at 100 kHz or
for C > 470 nF at 10 kHz
Capacitance
Tangent of loss angle
Insulation resistance
PERFORMANCE REQUIREMENTS
No visible damage
Legible marking
|C/C| 5 % compared to values measured
in 4.12.1
Increase of tan
0.005 for: C 100 nF or
0.010 for: 100 nF < C 220 nF or
0.015 for: 220 nF < C 470 nF and
0.003 for: C > 470 nF
Compared to values measured in 4.12.1
50 % of values specified in section
“Insulation Resistance” of this specification
|C/C| 3 % compared to values measured
in 4.13.1
Increase of tan
0.005 for: C 100 nF or
0.010 for: 100 nF < C 220 nF or
0.015 for: 220 nF < C 470 nF and
0.003 for: C > 470 nF
Compared to values measured in 4.13.1
50 % of values specified in section
“Insulation Resistance” of this specification
www.vishay.com
For technical questions, contact: dc-film@vishay.com
Document Number: 28105
76
Revision: 13-Dec-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000