ADP7118
Data Sheet
INPUT AND OUTPUT CAPACITANCE, RECOMMENDED SPECIFICATIONS
Table 2.
Parameter
INPUT AND OUTPUT CAPACITANCE
Minimum Capacitance1
Capacitor Effective Series Resistance (ESR)
Symbol Test Conditions/Comments
CMIN
TA = −40°C to +125°C
RESR
TA = −40°C to +125°C
Min Typ Max Unit
1.5
0.001
µF
0.3 Ω
1 The minimum input and output capacitance must be greater than 1.5 μF over the full range of operating conditions. The full range of operating conditions in the
application must be considered during device selection to ensure that the minimum capacitance specification is met. X7R and X5R type capacitors are recommended,
while Y5V and Z5U capacitors are not recommended for use with any LDO.
Rev. C | Page 4 of 23