STM8AP528A データシートの表示（PDF） - STMicroelectronics

部品番号

コンポーネント説明

メーカー

STM8AP528A

Automotive 8-bit MCU, with up to 128 Kbyte Flash, data EEPROM, 10-bit ADC, timers, LIN, CAN, USART, SPI, I2C, 3 to 5.5 V

STMicroelectronics 

Product overview

STM8AF526x/8x/Ax STM8AF6269/8x/Ax

5.9.5

• Interrupt:

– Successful address/data communication

– Error condition

– Wakeup from Halt

• Wakeup from Halt on address detection in slave mode

Controller area network interface (beCAN)

The beCAN controller (basic enhanced CAN), interfaces the CAN network and supports the

CAN protocol version 2.0A and B. It is equipped with a receive FIFO and a very versatile

filter bank. Together with a filter match index, this allows a very efficient message handling in

today’s car network architectures. The CPU is significantly unloaded. The maximum

transmission speed is 1 Mbit/s.

Transmission

• Three transmit mailboxes

• Configurable transmit priority by identifier or order request

Reception

• 11- and 29-bit ID

• 1 receive FIFO (3 messages deep)

• Software-efficient mailbox mapping at a unique address space

• FMI (filter match index) stored with message for quick message association

• Configurable FIFO overrun

• Time stamp on SOF reception

• 6 filter banks, 2 x 32 bytes (scalable to 4 x 16-bit) each, enabling various masking

configurations, such as 12 filters for 29-bit ID or 48 filters for 11-bit ID.

• Filtering modes (mixable):

– Mask mode permitting ID range filtering

– ID list mode

Interrupt management

• Maskable interrupt

• Software-efficient mailbox mapping at a unique address space

26/125

DocID14395 Rev 15

Share Link: