SFH4655(2005) データシートの表示（PDF） - OSRAM GmbH

部品番号

コンポーネント説明

メーカー

SFH4655
(Rev.:2005)

Narrow beam LED in MIDLED package

OSRAM GmbH 

Vorläufige Daten / Preliminary Data

SFH 4650, SFH 4655

Lötbedingungen

Soldering Conditions

IR-Reflow Lötprofil für bleifreies Löten

IR Reflow Soldering Profile for lead free soldering

Vorbehandlung nach JEDEC Level 2

Preconditioning acc. to JEDEC Level 2

(nach J-STD-020B)

(acc. to J-STD-020B)

300

T 250

Maximum Solder Profile

Recommended Solder Profile

Minimum Solder Profile

OHLA0687

200

150

100

Ramp Up

50

3 K/s (max)

120 s max

10 s min

30 s max

Ramp Down

6 K/s (max)

100 s max

min. condition for IR Reflow Soldering:

solder point temperature 235 °C for at least 10 sec.

0

0

50

100

150

200

250

s 300

t

Verarbeitungshinweis: Das Gehäuse ist mit Silikon vergossen. Mechanischer Streß auf der

Bauteiloberfläche sollte so gering wie möglich gehalten werden.

Handling indication: The package is casted with silicone. Mechanical stress at the surface of

the unit should be as low as possible.

Published by

OSRAM Opto Semiconductors GmbH

Wernerwerkstrasse 2, D-93049 Regensburg

www.osram-os.com

© All Rights Reserved.

The information describes the type of component and shall not be considered as assured characteristics.

Terms of delivery and rights to change design reserved. Due to technical requirements components may contain

dangerous substances. For information on the types in question please contact our Sales Organization.

Packing

Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office.

By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing

material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs

incurred.

Components used in life-support devices or systems must be expressly authorized for such purpose! Critical

components 1 may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS.

1 A critical component is a component used in a life-support device or system whose failure can reasonably be expected

to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system.

2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain

and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered.

2005-03-08

8

Share Link: