DME-3000 データシートの表示（PDF） - Sony Semiconductor

部品番号

コンポーネント説明

メーカー

DME-3000

Digital Multi Effects Systems

Sony Semiconductor 

SONY

The sub channel video is provided from the EXT/C input connector,

and must be an SDI signal. Duality operation requires either the

BKDM-3021, BKDM-3023, or BKDM-7020 input options. Video

effects require the BKDM-7021 board.

For added realism, shadow and lights may be applied to each video

channel of Duality Mode.

• Brick Effect — Ever try to create 3-D solids with a single channel?

It’s easy!

Primary

Video

Side A:

Matte or

External Video

SONY

Brick Effect

Side B:

Matte

Side A

Video

Primary Video

with External Key

SONY

Brick Effect - External Key

Side B:

Matte

With both the BKDM-7060 and BKDM 7070 boards installed, you can

create brick-shaped objects and map video and matte color onto the

surfaces — once again, with only a single DME-7000 channel! The

brick itself can be transformed and rotated in 3-D space.

• Defocus and Blur Effects — Here’s a chance to lose focus on

purpose. The DME-7000 supports advanced Defocus and Blur effects,

with reduced edge noise. The Blur can be independently adjusted for

luminance and chrominance in the horizontal and vertical directions.

• Glow Effect — For that misty-morning illusion, you can soften

highlighted areas and make them glow with both the optional BKDM-

7060 and BKDM-7070 boards installed.

• Advanced Lighting Effects — Building on the DME-3000’s lighting

capabilities (with two independent light sources), the DME-7000 adds

advanced spot light effects (providing a total of three light sources).

An additional target lighting mode provides a realistic light source

that can be added in space (as if it is originating from outside the

screen) and cast onto the background and foreground. This light

source can interact with the image location and transformation.

When the DME image is keyed over a switcher background, or when it

is used with the DME’s internal background capabilities, target

lighting provides three creative possibilities:

– In “Foreground Only” mode, lighting is applied to the image’s

foreground. The light is cast from space — when a DME image

moves under the light, the image is illuminated.

– In “Background Only” mode, lighting is applied to the image

over which the DME image is keyed. When the DME image

moves over the background, the background light is covered up.

– In “Foreground plus Background” mode, lighting is applied to

the foreground and background together. When the DME image

moves, it moves under the light cast from above, but the

background light is not affected.

8 • Features and Benefits

DME-3000/7000 • Product Guide

Share Link: