78F0988 データシートの表示（PDF） - NEC => Renesas Technology
部品番号
コンポーネント説明
メーカー
78F0988 Datasheet PDF : 52 Pages
| |||
µPD78F0988A, 78F0988A(A)
7. ELECTRICAL SPECIFICATIONS
Absolute Maximum Ratings (TA = 25°C)
Parameter
Symbol
Conditions
Ratings
Unit
Supply voltage
Input voltage
VDD
VPP
AVDD
AVREF
AVSS
VI
Output voltage
VO
Analog input voltage VAN
Output current, high IOH
Output current, low
IOLNote
Operating ambient
TA
temperature
Storage temperature Tstg
–0.3 to +6.5
V
–0.3 to +10.5
V
–0.3 to VDD + 0.3
V
–0.3 to VDD + 0.3
V
–0.3 to +0.3
V
P00 to P03, P10 to P17, P20 to P26, P30 to P37, P50
–0.3 to VDD + 0.3
V
to P57, P64 to P67, TO70 to TO75, X1, X2, RESET
–0.3 to VDD + 0.3
V
P10 to P17
Analog input pin
AVSS – 0.3 to AVREF + 0.3 V
and –0.3 to VDD + 0.3
Per pin
–10
mA
P00, P01, P30 to P37, P40 to P47, P50 to P57, P64 to P67 total
–15
mA
P02, P03, P20 to P26, TO70 to TO75 total
–15
mA
P00 to P03, P10 to P17, P20 to P26, Peak value
20
mA
P30 to P37, P40 to P47, P64 to P67 per pin rms value
10
mA
P50 to P57, TO70 to TO75 per pin Peak value
30
mA
rms value
15
mA
P00, P01, P30 to P37, P40 to P47, P64 to P67 Peak value
100
mA
total
rms value
70
mA
P02, P03, P20 to P26 total
Peak value
30
mA
rms value
15
mA
TO70 to TO75 total
Peak value
100
mA
rms value
70
mA
P50 to P57 total
Peak value
100
mA
rms value
70
mA
In normal operating mode
–40 to +85
°C
In flash memory programming mode
+10 to +40
°C
–40 to +125
°C
Note The rms value should be calculated as follows: [rms value] = [Peak value] × √Duty
Caution
Product quality may suffer if the absolute maximum rating is exceeded even momentarily for any
parameter. That is, the absolute maximum ratings are rated values at which the product is on the
verge of suffering physical damage, and therefore the product must be used under conditions that
ensure that the absolute maximum ratings are not exceeded.
Capacitance (TA = 25°C, VDD = VSS = 0 V)
Parameter
Input capacitance
I/O capacitance
Symbol
CIN
CIO
Conditions
f = 1 MHz Unmeasured pins returned to 0 V
f = 1 MHz
P00 to P03, P20 to P26, P30
Unmeasured pins to P37, P40 to P47, P50 to
returned to 0 V P57, P64 to P67, TO70 to TO75
MIN.
TYP.
MAX. Unit
15
pF
15
pF
Remark Unless specified otherwise, the characteristics of alternate-function pins are the same as those of port pins.
22
Data Sheet U15801EJ1V0DS
Share Link: 