MPC8280ZQP データシートの表示（PDF） - Freescale Semiconductor

部品番号

コンポーネント説明

メーカー

MPC8280ZQP

PowerQUICC II Family Hardware Specifications

Freescale Semiconductor 

Table 27. Document Revision History (continued)

Document Revision History

Revision Date

Substantive Changes

1.0

2/2004 • Removal of “Advance Information” and “Preliminary.” The MPC8280 is fully qualified.

• Table 2: New

• Figure 1: Modification to note 2

• Section 1.1: Core frequency range is 166–450 MHz

• Addition of ZQ (516 PBGA with Lead spheres) package references

• Table 4: VDD and VCCSYN modified to 1.45–1.60 V

• Note following Table 4: Modified

• Table 5: Addition of note 2 regarding TRST and PORESET (see VIH row of Table 5)

• Table 5: Changed IOL for 60x signals to 6.0 mA

• Table 5: Moved QREQ to VOL: IOL= 3.2 mA

• Table 5: Addition of critical interrupt (CINT) to IRQ5 for VOL (IOL = 6.0mA)

• Table 10: Addition of ΨJT and note 4

• Sections 4.1–4.5: New

• Table 12: Modified power values (+ 150mW to each)

• Table 14: Addition of note 2. Changed PCI impedance to 27 Ω.

• Table 9: Changes to sp36b, SP38a, sp38b, sp37a, sp39a, sp40 and sp41

• Table 20: Changes to sp16a, sp18a, sp20 and sp21

• Section 6.2: Addition of Note: CLKIN Jitter and Duty Cycle

• Table 11: Changes to sp13 @ 66 and 83 MHz, sp14 @ 83 MHz

• Table 12: Change to sp30 (data bus signals). Changes to sp33b. Removal of note 2.

• Table 18 through Table 37: Modification of note 1 regarding CPU and CPM Fmin. Modification

to corresponding values in tables.

• Table 23: Addition of note 1 to TRST (AH3) and PORESET (AG6)

• Table 23: Addition of RXD3 to CPM port pin PB14. Previously omitted.

• Table 23: Addition of critical interrupt (CINT) to B21 and U4. Previously omitted.

• Table 23: Addition of note 5 to ‘No connect’ (AA1, AG4)

• Addition of “Note: Temperature Reflow for the VR Package" on page 76

• Table 25: Addition of note 1 to TRST (F22) and PORESET (B25)

• Table 25: Addition of previously omitted signals that are multiplexed with CPM port pins:

PA6—FCC2_UT_RXADDR3

PA7—FCC2_UT_TXADDR3

PA8—FCC2_UT_TXADDR4

PB14—RXD3

PC19—SPICLK

PC22—FCC1_UT_TXPRTY

PC28—FCC2_UT_RXADDR4

• Table 25: Removal of serial interface 1 (SI1) signals from port pins (see note 2 in Figure 1):

PA[6–9], PB[8–17, 20–25], PC[6–7, 10–13], PD[4, 10–13, 16, 23–28]

• Table 25: Addition of critical interrupt (CINT) to AC1 and B14. Previously omitted.

• Table 25: Addition of note 5 to ‘No connect’ (E17, C23)

MPC8280 PowerQUICC II Family Hardware Specifications, Rev. 2

Freescale Semiconductor

81

Share Link: