[AKD4712-A]
Control Software Manual
■ Evaluation Board and Control Software Settings
1. Set up the evaluation board as needed, according to the previous terms.
2. Connect the evaluation board to a PC with USB cable.
USB control is recognized as HID (Human Interface Device) on PC.
When it is not recognized properly, please reconnect the evaluation board to PC.
3. Insert the CD-ROM labeled “AKD4712-A Evaluation Kit” into the CD-ROM drive.
4. Access the CD-ROM drive and double-click the icon “akd4712-A.exe” to open the control program.
5. Begin evaluation by following the procedure below.
[Supported OS]
Windows 2000 / XP
64bit OS is not supported.
Windows 95 / 98 / Me / NT are not supported.
<KM111300>
-5-
2012/06