AK4712EN_ データシートの表示（PDF） - Asahi Kasei Microdevices

部品番号

コンポーネント説明

メーカー

AK4712EN_

AK4712 Evaluation Board Rev.0

Asahi Kasei Microdevices 

[AKD4712-A]

1-1. [Write]: Data Write Dialog

Select the [Write] button located on the right of the each corresponding address when changing two or more bits on

the same address simultaneously.

Click the [Write] button for the register pop-up dialog box shown below.

When the checkbox next to the register is checked, the data will become “H” or “1”. When the checkbox is not

checked, the data will become “L” or “0”. Click [OK] to write the set values to the registers, or click [Cancel] to

cancel this setting.

Figure 4. [Register Set] window

1-2. [Read]: Data Read

Click the [Read] button located on the right of the each corresponding address to execute a register read.

The current register value will be displayed in the register window as well as in the upper right hand DEBUG

window.

Button Down indicates “H” or “1” and the bit name is shown in red (when read only the bit name is shown in dark

red).

Button Up indicates “L” or “0” and the bit name is shown in blue (when read only the bit name is shown in gray)

Please be aware that button statuses will be changed by a Read command.

<KM111300>

-9-

2012/06

Share Link: