www.DataSheet4U.net
Signal Name
+RED5
+RED4
+RED3
+RED2
+RED1
+RED0
+GREEN5
+GREEN4
+GREEN3
+GREEN2
+GREEN1
+GREEN0
+BLUE5
+BLUE4
+BLUE3
+BLUE2
+BLUE1
+BLUE0
CLK
DE
VSYNC
HSYNC
Description
Red Data 5 (MSB)
Red Data 4
Red Data 3
Red Data 2
Red Data 1
Red Data 0 (LSB)
Red-pixel Data
Green Data 5 (MSB)
Green Data 4
Green Data 3
Green Data 2
Green Data 1
Green Data 0 (LSB)
Green-pixel Data
Blue Data 5 (MSB)
Blue Data 4
Blue Data 3
Blue Data 2
Blue Data 1
Blue Data 0 (LSB)
Blue-pixel Data
Data Clock
Display Timing
Vertical Sync
Horizontal Sync
Red-pixel Data
Each red pixel’s brightness data consists of these
6 bits pixel data.
Green-pixel Data
Each green pixel’s brightness data consists of these
6 bits pixel data.
Blue-pixel Data
Each blue pixel’s brightness data consists of these
6 bits pixel data.
The typical frequency is 40MHz. The signal is
used to strobe the pixel data and DE signals.
All pixel data shall be valid at the falling edge when
the DE signal is high.
This signal is strobed at the falling edge of CLK.
When the signal is high, the pixel data shall be valid
to be displayed.
The signal is synchronized to CLK.
The signal is synchronized to CLK.
Note:Output signals from any system shall be low or Hi-Z state when VDD is off.
(C) Copyright AU Optroncis, Inc.
2004 All Right Reserved.
No Reproduction and Redistribution Allowed.
G121SN01 V.0 ver.1
14/28