HCPL-4661 データシートの表示（PDF） - Broadcom Corporation
部品番号
コンポーネント説明
メーカー
HCPL-4661 Datasheet PDF : 30 Pages
| |||
6N137, HCNW137, HCNW2601, HCNW2611, HCPL-0600, HCPL-0601, HCPL-
0611, HCPL-0630, HCPL-0631, HCPL-0661, HCPL-2601, HCPL-2611, HCPL-
2630, HCPL-2631, HCPL-4661 Data Sheet
Switching Specifications (AC)
High CMR, High Speed TTL Compatible Optocouplers
Over Recommended Temperature (TA = –40°C to + 85°C), VCC = 5V, IF = 7.5 mA unless otherwise specified.
All Typicals at TA = 25°C, VCC = 5V.
Parameter
Symbol Packagea Min.
Typ.
Max. Units Test Conditions Figure Note
Propagation Delay Time to
tPLH
High Output Level
20
48
75b
ns TA = 25°C
8, 9, 10 c, d, f
RL = 350
CL = 15 pF
100
RL = 350
CL = 15 pF
Propagation Delay Time to
tPHL
Low Output Level
25
50
75*
ns TA = 25°C
RL = 350
CL = 15 pF
c, e, f
100
RL = 350
CL = 15 pF
Pulse Width Distortion
|tPHL – tPLH| 8-Pin DIP
—
3.5
35
ns RL = 350
8, 9, 10, f, g
SO-8
CL = 15 pF
11
Widebody
40
Propagation Delay Skew
tPSK
—
—
40
ns RL = 350
CL = 15 pF
f, g, h
Output Rise Time (10-90%)
tr
—
24
—
ns RL = 350
CL = 15 pF
12
c, f
Output Fall Time (90-10%)
tf
—
10
—
ns RL = 350
CL = 15 pF
12
c, f
Propagation Delay Time of
Enable from VEH to VEL
Propagation Delay Time of
Enable from VEL to VEH
tELH
Single
—
30
—
ns RL = 350,
13, 14
i
Channel
CL = 15 pF,
tEHL
Single
—
20
—
ns VEL = 0V,
j
Channel
VEH = 3V
a. Ratings apply to all devices except otherwise noted in the Package column.
b. JEDEC registered data for the 6N137.
c. Each channel.
d. The tPLH propagation delay is measured from the 3.75 mA point on the falling edge of the input pulse to the 1.5V point on the rising edge of
the output pulse.
e. The tPHL propagation delay is measured from the 3.75 mA point on the rising edge of the input pulse to the 1.5V point on the falling edge of
the output pulse.
f. No external pull up is required for a high logic state on the enable input. If the VE pin is not used, tying VE to VCC will result in improved CMR
performance. For single channel products only.
g. See Propagation Delay, Pulse-Width Distortion, and Propagation Delay Skew for more information.
h. tPSK is equal to the worst case difference in tPHL and/or tPLH that will be seen between units at any given temperature and specified test
conditions.
i. The tELH enable propagation delay is measured from the 1.5V point on the falling edge of the enable input pulse to the 1.5V point on the rising
edge of the output pulse.
j. The tEHL enable propagation delay is measured from the 1.5V point on the rising edge of the enable input pulse to the 1.5V point on the falling
edge of the output pulse.
Broadcom
AV02-0940EN
18
Share Link: 