HCPL-0630 データシートの表示（PDF） - Broadcom Corporation

部品番号

コンポーネント説明

メーカー

HCPL-0630

High CMR, High Speed TTL Compatible Optocouplers

Broadcom Corporation 

6N137, HCNW137, HCNW2601, HCNW2611, HCPL-0600, HCPL-0601, HCPL-

0611, HCPL-0630, HCPL-0631, HCPL-0661, HCPL-2601, HCPL-2611, HCPL-

2630, HCPL-2631, HCPL-4661 Data Sheet

Package Characteristics

High CMR, High Speed TTL Compatible Optocouplers

All Typicals at TA = 25°C.

Parameter

Sym.

Package

Test

Min. Typ. Max. Units Conditions Figure Note

Input-Output Insulation

II-Oa

Single 8-Pin DIP

Single SO-8

—

—

1

µA 45% RH, t = 5s,

VI-O = 3 kVdc,

TA = 25°C

Input-Output Momentary With-

stand Voltaged

VISO 8-Pin DIP, SO-8 3750

—

Widebody

5000 —

OPT 020f

5000 —

— Vrms RH 50%,

—

—

t = 1 min,

TA = 25°C

Input-Output Resistance

RI-O 8-Pin DIP, SO-8 —

1012

—

 VI-O = 500 Vdc,

Widebody

1012 1013

—

VI-O = 500 Vdc,

TA = 25°C

1011

—

—

VI-O = 500 Vdc,

TA = 100°C

Input-Output Capacitance

CI-O 8-Pin DIP, SO-8 —

Widebody

—

0.6

—

0.5

0.6

pF f = 1 MHz,

TA = 25°C

Input-Input Insulation Leakage

Current

II-I

Dual Channel

— 0.005 —

µA RH 45%, t = 5s,

VI-I = 500V

Resistance (Input-Input)

RI-I

Dual Channel

—

1011

—

 RH 45%, t = 5s,

VI-I = 500V

Capacitance (Input-Input)

CI-I Dual 8-Pin DIP —

0.03

—

Dual SO-8

0.25

pF f = 1 MHz

a. JEDEC registered data for the 6N137. The JEDEC Registration specifies 0°C to 70°C. Broadcom specifies –40°C to 85°C.

b, c

b, c

b, e

b, g, h

b, g, h

i

i

i

b. Device considered a two-terminal device: pins 1, 2, 3, and 4 shorted together, and pins 5, 6, 7, and 8 shorted together.

c. In accordance with UL1577, each optocoupler is proof tested by applying an insulation test voltage ≥ 4500 Vrms for one second (leakage

detection current limit, II-O ≤ 5 µA). This test is performed before the 100% production test for partial discharge (Method b) shown in the IEC/

EN/DIN EN 60747-5-5 Insulation Characteristics Table, if applicable.

d. The Input-Output Momentary Withstand Voltage is a dielectric voltage rating that should not be interpreted as an input-output continuous

voltage rating. For the continuous voltage rating refer to the IEC/EN/DIN EN 60747-5-5 Insulation Characteristics Table (if applicable), your

equipment level safety specification or Broadcom Application Note 1074, Optocoupler Input-Output Endurance Voltage.

e. In accordance with UL 1577, each optocoupler is proof tested by applying an insulation test voltage ≥ 6000 Vrms for one second (leakage

detection current limit, II-O ≤ 5 µA). This test is performed before the 100% production test for partial discharge (Method b) shown in the IEC/

EN/DIN EN 60747-5-5 Insulation Characteristics Table, if applicable.

f. For 6N137, HCPL-2601/2611/2630/2631/4661 only.

g. Each channel.

h. Measured between the LED anode and cathode shorted together and pins 5 through 8 shorted together. For dual channel products only.

i. Measured between pins 1 and 2 shorted together, and pins 3 and 4 shorted together. For dual channel products only.

Broadcom

AV02-0940EN

20

Share Link: