ATA6661
9. Revision History
Please note that the following page numbers referred to in this section refer to the specific revision
mentioned, not to this document.
Revision No.
4729M-AUTO-02/09
History
• Section 6 “Electrical Characteristics” numbers 3.2 and 4.2 on page 9 changed
4729L-AUTO-04/08
• Section 7 “Ordering Information” on page 14 changed
4729K-AUTO-10/07
• Section 7 “Ordering Information” on page 14 changed
• Put datasheet in a new template
4729J-AUTO-07/07
• Capital T for time generally changed in a lower case t
• Figure 1-1 “Block Diagram” on page 2 changed
• Figure 6-2 “Application Circuit” on page 13 changed
• Put datasheet in a new template
4729I-AUTO-12/06
• Section 3.5 “TXD Dominant Time-out Function” changed
• Section 7 “Ordering Information” on page 14 changed
• Put datasheet in a new template
• Pb-free logo on page 1 deleted
• Features on page 1 changed
• Section 3-10 “Mode of Operation” on page 5 changed
4729H-AUTO-10/06
• Figure 3-1 “Mode of Operation” on page 6 changed
• Section 3.15 “Physical Layer Compatibility” on page 6 added
• Section 6 “Electrical Characteristics” number 4.5 on page 9 added
• Section 6 “Electrical Characteristics” number 9.5 on page 11 changed
• Section 6 “Electrical Characteristics” number 10.3 and 10.4 on page 11 added
4729G-AUTO-10/05
• Figure 6-2 “Application Circuit” on page 12 changed
• Pb-free Logo on page 1 added
• Table “Ordering Information” on page 13 changed
• Section 2.14 “Fail-safe Features” on page 5 changed
• Figure 2.2 “LIN Wake-up Waveform Diagram” on page 6 changed
4729F-AUTO-05/05
• Table “Absolute Maximum Ratings” on page 7 changed
4729E-AUTO-01/05
• Table “Electrical Characteristics”: Rows: 7.1, 7.2, 7.4, 8.5, 9.3 and 9.5
changed
• Put datasheet in a new template
• Table “Ordering Information” on page 13 changed
• Put datasheet into new template
• Section “Features” on page 1 changed
• Figure 1 “Block Diagram” on page 1 changed
• Section “Bus Pin (LIN)” on page 2 changed
• Section “TX Dominant Time-out Function” on page 3 changed
• Section “Output Pin (RXD)” on page 3 changed
• Section “Inhibit Output Pin (INH)” on page 3 changed
4729D-AUTO-10/04
• Section “Wake-up Input Pin (WAKE)” on page 3 changed
• Section “Remote Wake-up via Dominant Bus State” on page 4 changed
• Section “Fail-safe Features” added
• Table “Absolute Maximum Ratings” on page 7 changed
• Table “Electrical Characteristics”: Rows: 1.3, 1.4, 1.5, 6.2, 7.9, 7.10, 7.11 and
9.3 changed
• Table “Electrical Characteristics”: Rows: 2.4, 8.5, 8.6 and 8.7
4729C-AUTO-06/04
• Figure 7 “Application Circuit” on page 12 changed
• Table “Ordering Information” on page 13 changed
15
4729M–AUTO–02/09