MC145220EVK データシートの表示（PDF） - Motorola => Freescale

部品番号

コンポーネント説明

メーカー

MC145220EVK

MC145220EVK Evaluation Board Manual

Motorola => Freescale 

Freescale Semiconductor, Inc.

‘Select from the available options’ (continued)

ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005

Welcome to MC145xxx EVK Demonstration Program, rev 4.0

Select from the available options

Available Boards – Current target board is: A, MC145220 Dual

Brd [A]!: MC145220 Dual Brd [–]!: N/A

Brd [–]!: N/A

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

MC145xxx Frequency Commands – Current Output Frequency is 70 MHz

[L]! Set to low freq.

60 MHz [W] Change default low freq.

[M]! Set to med. freq. 70 MHz [Y] Change default med. freq.

[H]! Set to high freq. 80 MHz [Z] Change default high freq.

[U]! Step frequency up by step size [O] Set PLL output frequency

[D]! Step frequency down by step size [F] REFin freq. & channel spacing

MC145xxx Additional Commands

[E] Set function of output A

[N] Change C register and Prescale

[R] Set crystal/reference mode – Current mode is Ref. mode, REFout low

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Initialization/System Setup Commands:

[P] Set output port address – Current address is $278

[G] Change board definitions

[I] Initialize board(s), Write all registers

[X]! Terminate demonstration program. [?]! View help screen.

This screen shot is a representative sample of the screens within this program. To access this screen

with the MC145220 Dual EVK selected in the “Define boards to program” screen, press [Q]! . This will

place you in the “Select from the available options” screen you see above.

This sequence to access the “Select from the available options” screen works the same for any selected

board in the “Define boards to program” screen.

MOTOROLA

For More Information On This Product,

Go to: www.freescale.com

MC145220EVK

21

Share Link: