NXP Semiconductors
SSL21084T
Mains dimmable LED driver IC
Table 6. Characteristics …continued
Values specified at Tamb = 25 C unless otherwise specified; all voltages are measured with respect to ground; currents are
positive when flowing into the IC.
Symbol
Parameter
Conditions
Min Typ Max Unit
Temperature protection
Tth(act)otp
overtemperature protection
activation threshold temperature
160 170 180 C
Tth(rel)otp
overtemperature protection
release threshold temperature
90
100 110 C
[1] An internal clamp sets the supply voltage. The current into the VCC pin must not exceed the maximum IDD value (see Table 4).
[2] This parameter is not tested during production, by design it is guaranteed
SSL21084T
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 3 October 2013
© NXP B.V. 2013. All rights reserved.
16 of 22