AN2125 データシートの表示（PDF） - STMicroelectronics

部品番号

コンポーネント説明

メーカー

AN2125

uPSD3300 Series Design Guide for DK3300-ELCD Using KEIL

STMicroelectronics 

uPSD3300 Series Design Guide for DK3300-ELCD Using KEIL

First, an introduction to the Turbo uPSD. The family basic block diagram and features are in-

troduced, followed by an overview of the DK3300-ELCD Development Kit (Board). This hard-

ware is used with the Keil Tools to demonstrate ideas for project creation and design

development. A simple example is used for demonstration and explained in detail to provide

an understanding of the Keil tools and the DK3300-ELCD Development Kit. It is hoped that

with this information and other supporting documents available from STMicroelectronics, you

can design and develop your application/project using Turbo uPSD.

3.2 Requirements

In order to follow the examples and processes described here you will need a DK3300-ELCD

Development Kit as described above (Refer to section 2.2, Contents of DK3300 Kit).

Note: The DK3300-ELCD Development Kit meets all the requirements for use in the example

described here.

To use RLINK-ST, you will need a USB port and a Windows Operating System supporting the

USB (Win98SE, Win2000, Me, XP).

RLINK-ST is a Full-Speed device (12Mbit/s). It is delivered with a standard USB cable.

Note: Win95, Win98 First Edition and NT4.0 do NOT support USB.

IMPORTANT:

You must install PSDsoft Express 8.10 or later to have the capability to program a uPSD de-

vice.

3.3 Software Installation and Connections:

3.3.1 Software Installation

■ Insert the Raisonance disc supplied with DK3300-ELCD Development Kit in your CD drive.

The auto-run will bring up the program installation menu.

■ First Install PSDsoft Express, taking all the default choices.

■ Remove the Raisonance Disc and then insert the DK3300-ELCD Disc from

STMicroelectronics in the CD drive.

■ Navigate the screens and bring up the Menu page with "Install ST and 3rd Party Tools".

Click on it and then select ‘Keil IDE (Eval Version)’. Note this version is limited to 2KB of

Code size. Install Keil uVision 2 Compiler.

■ Next, go back to the Home menu on the CD and then navigate to bring up Menu page with

"Copy Device Drivers and Demo Code". Click on it and then:

■ Unzip the file pointing to C:\ root directory in your drive.

11/68

1

Share Link: