Setting Up Network Scanning
You can set up network scanning to your scanner using the Epson Scan 2 Utility.
First manually configure your scanner to connect to your network. Then follow the instructions here to set
up your computer for network scanning using the Epson Scan 2 Utility. Your scanner must be turned on
and connected to the network.
Note: Make a note of the IP address or host name of the scanner so you can enter it in these steps.
1. Do one of the following to start the Epson Scan 2 Utility:
• Windows 10: Click > EPSON > Epson Scan 2 Utility.
• Windows 8.x: Navigate to the Apps screen and select Epson Scan 2 Utility.
• Windows (other versions): Click or Start > All Programs or Programs > EPSON > Epson
Scan 2 > Epson Scan 2 Utility.
• Mac: Open the Applications folder, click Epson Software, and click Epson Scan 2 Utility.
2. Select Settings from the Scanner drop-down list.
You see a screen like this:
Note: If you see an Enable Editing button (Windows) or a lock icon (Mac), click it so that you can
modify the scanner settings.
19