PC3H4(1998) データシートの表示（PDF） - Sharp Electronics

部品番号

コンポーネント説明

メーカー

PC3H4
(Rev.:1998)

DEVICE SPECIFICATION FOR PHOTOCOUPLER

Sharp Electronics 

SHARP CORPORATION

ED-96027A

1 September 30, 1998

MODEL No.

PAGE

PC3H4

l/11

1. Application

This specification applies to the outline and characteristics

Model No. PC3H4.

of photocoupler;

2. Outline

Refer to the attached drawing No. CY8374KO2.

3. Ratings and characteristics

Refer to the attached sheet, page 4 to 6.

4. Reliability

Refer to the attached sheet, page 7.

5. Incoming inspection

Refer to the attached sheet, page 8.

6. Supplement

6.1 Isolation voltage shaI.I be measured in the following method.

(1) Short between anode and cathode on the primary side and between

collector and emitter on the secondary side.

(2) The dielectric withstand tester with zero-cross circuit shall be used.

(3) The wave form of applied voltage shah be a sine wave.

6.2 Packaging spectications

Refer to the attached sheet, page 9 to 11.

Share Link: