[SHENZHEN DITELONG INDUSTRIAL CO.,LTD]

FEATURES
• High intensity and reliability.
• Low power reguirement
• I.C. compatible

[Signal Transformer]

Available with Receptacle and Line Cord or Leads

Signal’s auto transformers provide the user the capability of adapting voltages for worldwide applications.
General Specifications
• Power - 100 VA to 2000 VA
• Voltage -
   EB version: 230V to 115V, 50/60Hz
   OF version: 230V to 115V or 115V to 230V, 50/60Hz
• Connections -
   EB version: Line cord and receptacle NEMA 5-15 style
   OF version: 8” leads
• Insulation System - Class B, 130º C
• Higher insulation class available

FEATURES
● 9.20mm (0.36 inch) DIGIT HEIGHT
● COMMON ANODE
● I.C. COMPATIBLE
● LOW POWER CONSUMPTION
● Pb FREE PRODUCTS
● ROHS COMPLIANCE
● BLACK FACE, WHITE SEGMENTS

High Efficiency Thyristor
Single Thyristor

Features / Advantages:
● Thyristor for line frequency
● Planar passivated chip
● Long-term stability

Applications:
● Line rectifying 50/60 Hz
● Softstart AC motor control
● DC Motor control
● Power converter
● AC power control
● Lighting and temperature control

General Description
The ILC7526 contains dual high side power control switches, with independent enable and flag functions, integrated into a single 8-pin SOIC package. With just a few external components, the ILC7526 can be easily configured to meet requirements for either self powered or bus powered USB (Universal Serial Bus) applications. The ILC7526 has active high ENABLE inputs, while the ILC7536 ENABLE inputs are active low.

Features
• 2 independent switches with ENABLE and FLAG
• 500mA continuous load current per switch (channel)
• 140mΩ maximum RDSON (switch on-resistance)
• 1.25A maximum short circuit current limit
• Thermal shutdown
• 110µA typical on-state supply current
• 0.75µA typical off-state supply current
• 2.4V typical undervoltage lockout
• 2.8V to 5.8V input voltage range
• 1 ms turn-on (soft-start)
• Fast turn-off
• Outputs can be forced higher than inputs (off-state)
• USB specification compliant
• Active-high or active-low ENABLE versions
• 8-pin SOIC or 8-pin mini-DIP packages

Applications
• USB host and self powered hubs
• USB bus-powered hubs
• USB monitors, printers, cameras and other USB controlled peripherals
• Hot plug-in power supplies
• Battery charger circuits

General Description
The ILC7526 contains dual high side power control switches, with independent enable and flag functions, integrated into a single 8-pin SOIC package. With just a few external components, the ILC7526 can be easily configured to meet requirements for either self powered or bus powered USB (Universal Serial Bus) applications. The ILC7526 has active high ENABLE inputs, while the ILC7536 ENABLE inputs are active low.

Features
• 2 independent switches with ENABLE and FLAG
• 500mA continuous load current per switch (channel)
• 140mΩ maximum RDSON (switch on-resistance)
• 1.25A maximum short circuit current limit
• Thermal shutdown
• 110µA typical on-state supply current
• 0.75µA typical off-state supply current
• 2.4V typical undervoltage lockout
• 2.8V to 5.8V input voltage range
• 1 ms turn-on (soft-start)
• Fast turn-off
• Outputs can be forced higher than inputs (off-state)
• USB specification compliant
• Active-high or active-low ENABLE versions
• 8-pin SOIC or 8-pin mini-DIP packages

Applications
• USB host and self powered hubs
• USB bus-powered hubs
• USB monitors, printers, cameras and other USB controlled peripherals
• Hot plug-in power supplies
• Battery charger circuits

The FT245R is a USB to parallel FIFO
interface with the following advanced
features:
• Single chip USB to parallel FIFO bidirectional data transfer interface.
• Entire USB protocol handled on the chip. No USB specific firmware programming required.
• Fully integrated 1024 bit EEPROM storing device descriptors and FIFO I/O configuration.
• Fully integrated USB termination resistors.
• Fully integrated clock generation with no external crystal required.
• Data transfer rates up to 1Mbyte / second.
• 128 byte receive buffer and 256 byte transmit
   buffer utilising buffer smoothing technology to
   allow for high data throughput.
• FTDI‟s royalty-free Virtual Com Port (VCP) and
   Direct (D2XX) drivers eliminate the
   requirement for USB driver development in
   most cases.
• Unique USB FTDIChip-ID™ feature.
• Configurable FIFO interface I/O pins.
• Synchronous and asynchronous bit bang interface options.

Typical Applications
• Upgrading Legacy Peripherals to USB
• Cellular and Cordless Phone USB data transfer cables and interfaces
• Interfacing MCU/PLD/FPGA based designs to USB
• USB Audio and Low Bandwidth Video data transfer
• PDA to USB data transfer
• USB Smart Card Readers
• USB Instrumentation
• USB Industrial Control
• USB MP3 Player Interface
• USB FLASH Card Reader and Writers
• Set Top Box PC - USB interface
• USB digital Camera Interface
• USB Hardware Modems
• USB Wireless Modems
• USB Bar Code Readers
• USB Software and Hardware Encryption Dongles

General Description
The ILC7526 contains dual high side power control switches, with independent enable and flag functions, integrated into a single 8-pin SOIC package. With just a few external components, the ILC7526 can be easily configured to meet requirements for either self powered or bus powered USB (Universal Serial Bus) applications. The ILC7526 has active high ENABLE inputs, while the ILC7536 ENABLE inputs are active low.

Features
• 2 independent switches with ENABLE and FLAG
• 500mA continuous load current per switch (channel)
• 140mΩ maximum RDSON (switch on-resistance)
• 1.25A maximum short circuit current limit
• Thermal shutdown
• 110µA typical on-state supply current
• 0.75µA typical off-state supply current
• 2.4V typical undervoltage lockout
• 2.8V to 5.8V input voltage range
• 1 ms turn-on (soft-start)
• Fast turn-off
• Outputs can be forced higher than inputs (off-state)
• USB specification compliant
• Active-high or active-low ENABLE versions
• 8-pin SOIC or 8-pin mini-DIP packages

Applications
• USB host and self powered hubs
• USB bus-powered hubs
• USB monitors, printers, cameras and other USB controlled peripherals
• Hot plug-in power supplies
• Battery charger circuits

General description

PNP medium power transistor in a Surface-Mounted Device (SMD) plastic package.

Features

High current

Three current gain selections

1.4 W total power dissipation

Medium power SMD plastic package

Overview
The Hall Effect sensor IC TLE4941C is designed to provide information about rotational speed to modern vehicle dynamics control systems and ABS. The output has been designed as a two wire current interface. The sensor operates without external components and combines a fast powerup time with a low cut-off frequency. Excellent accuracy and sensitivity is specified for harsh automotive requirements as a wide temperature range, high ESD and EMC robustness. State-of-the art BiCMOS technology is used for monolithic integration of the active sensor areas and the signal conditioning circuitry.

Features
• Two-wire current interface
• Dynamic self-calibration principle
• Single chip solution
• No external components needed
• High sensitivity
• South and north pole pre-induction possible
• High resistance to piezo effects
• Large operating air-gaps
• Wide operating temperature range
• TLE4941C: 1.8 nF overmolded capacitor