P/N +説明+コンテンツ検索
AZ Displays
DESCRIPTION:
• The HRM series are miniaturized receivers FOR INFRARED REMOTE CONTROL SYSTEMS. PIN diode and preamplifier are assenmbled on lead frame. The demoduolated output signal can be decoded directly by a microprocessor.
FEATURES:
• High Reliability
• Inner shield FOR good anti-interference ability
• Low Power Consumption, only 5V supply voltage
• High Sensitivity, large transmission range
Vishay Semiconductors
Description
The TSOP22.. – series are miniaturized receivers FOR INFRARED REMOTE CONTROL SYSTEMS. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter.
The demodulated output signal can directly be decoded by a microprocessor. The main benefit is the reliable function even in disturbed ambient and the protection against uncontrolled output pulses.
Features
● PHOTO detector and preamplifier in one package
● Internal filter FOR PCM frequency
● TTL and CMOS compatibility
● Output active low
● Improved shielding against electrical field disturbance
● Suitable burst length ≥10 cycles/burst
Special Features
● Small size package
● High immunity against disturbance light
● No occurrence of disturbance pulses at the output
● Short settling time after power on (<200s)
● Contiunous data transmission possible ( 800 bursts/s)
Vishay Semiconductors
Description
The TSOP12.. – series are miniaturized receivers FOR INFRARED REMOTE CONTROL SYSTEMS. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter.
Features
PHOTO detector and preamplifier in one package
Internal filter FOR PCM frequency
Improved shielding against electrical field disturbance
TTL and CMOS compatibility
Output active low
Low power consumption
Suitable burst length ≥10 cycles/burst
Special Features
Enhanced immunity against all kinds of disturbance light
No occurrence of disturbance pulses at the output
Vishay Semiconductors
The HS0038A2. – series are miniaturized receivers FOR INFRARED REMOTE CONTROL SYSTEMS. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter.
Vishay Semiconductors
Description
The TSOP18..QJ3V – series are miniaturized receivers FOR INFRARED REMOTE CONTROL SYSTEMS. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter. The demodulated output signal can directly be decoded by a microprocessor. The main benefit is the reliable function even in disturbed ambient and the protection against uncontrolled output pulses.
Features
PHOTO detector and preamplifier in one package
Internal filter FOR PCM frequency
TTL and CMOS compatibility
Output active low
Improved shielding against electrical field disturbance
Suitable burst length ≥6 cycles/burst
Special Features
Small size package
Supply voltage 3–6 Volt
Enhanced immunity against all kinds of disturbance light
No occurrence of disturbance pulses at the output
Short settling time after power on (<200s)
Vishay Semiconductors
Description
The TSOP18..RF3V – series are miniaturized receivers FOR INFRARED REMOTE CONTROL SYSTEMS. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter. The demodulated output signal can directly be decoded by a microprocessor. The main benefit is the reliable function even in disturbed ambient and the protection against uncontrolled output pulses.
Features
PHOTO detector and preamplifier in one package
Internal filter FOR PCM frequency
TTL and CMOS compatibility
Output active low
Improved shielding against electrical field disturbance
Suitable burst length ≥6 cycles/burst
Special Features
Small size package
Supply voltage 3–6 Volt
Enhanced immunity against all kinds of disturbance light
No occurrence of disturbance pulses at the output
Short settling time after power on (<200s)
Vishay Semiconductors
Description
The TSOP18..SS3VA – series are miniaturized receivers FOR INFRARED REMOTE CONTROL SYSTEMS. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter. The demodulated output signal can directly be decoded by a microprocessor. The main benefit is the reliable function even in disturbed ambient and the protection against uncontrolled output pulses.
Features
PHOTO detector and preamplifier in one package
Internal filter FOR PCM frequency
TTL and CMOS compatibility
Output active low
Improved shielding against electrical field disturbance
Suitable burst length ≥6 cycles/burst
Special Features
Small size package
Supply voltage 3–6 Volt
Enhanced immunity against all kinds of disturbance light
No occurrence of disturbance pulses at the output
Short settling time after power on (<200s)
Vishay Semiconductors
Description
The TSOP48..QJ1 – series are miniaturized receivers FOR INFRARED REMOTE CONTROL SYSTEMS. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter.
The demodulated output signal can directly be decoded by a microprocessor. TSOP48..QJ1 is the standard IR REMOTE CONTROL receiver series, supporting all major transmission codes.
Features
● PHOTO detector and preamplifier in one package
● Internal filter FOR PCM frequency
● Improved shielding against electrical field disturbance
● TTL and CMOS compatibility
● Output active low
● Low power consumption
● High immunity against ambient light
● Continuous data transmission possible (800 bit/s)
● Suitable burst length ≥10 cycles/burst
Vishay Semiconductors
Description
The TSOP48..RF1 – series are miniaturized receivers FOR INFRARED REMOTE CONTROL SYSTEMS. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter.
The demodulated output signal can directly be decoded by a microprocessor. TSOP48..RF1 is the standard IR REMOTE CONTROL receiver series, supporting all major transmission codes.
Features
● PHOTO detector and preamplifier in one package
● Internal filter FOR PCM frequency
● Improved shielding against electrical field disturbance
● TTL and CMOS compatibility
● Output active low
● Low power consumption
● High immunity against ambient light
● Continuous data transmission possible (800 bit/s)
● Suitable burst length ≥10 cycles/burst
Vishay Semiconductors
Description
The TSOP48..UH1 – series are miniaturized receivers FOR INFRARED REMOTE CONTROL SYSTEMS. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter.
The demodulated output signal can directly be decoded by a microprocessor. TSOP48..UH1 is the standard IR REMOTE CONTROL receiver series, supporting all major transmission codes.
Features
● PHOTO detector and preamplifier in one package
● Internal filter FOR PCM frequency
● Improved shielding against electrical field disturbance
● TTL and CMOS compatibility
● Output active low
● Low power consumption
● High immunity against ambient light
● Continuous data transmission possible (800 bit/s)
● Suitable burst length ≥10 cycles/burst
| 12345678910 Next |
|
|