MARK SENSOR

DESCRIPTION
The Rixson Firemark FM Series electromagnetic door releases hold fire and smoke barrier doors open until released by a remote smoke detector switch, fire alarm control or sprinkler system. In the event of power failure, doors are released to close automatically, but may be opened or closed manually at any time.
The door holders have a sprayed aluminum finish. All models feature a “multi-voltage” design, allowing them to operate on 12 VDC, 24 VAC/DC, or 120 VAC, thus simplifying both installation and inventory.

FEATURES
• Fail-Safe Operation
• Approx. 35 lbs. (15.9 kg) Holding Power
• Positive Release Button to Initiate Closing Motion when the Electromagnet is De-Energized

DATELs new DMS-20PC-FM Series are the world’s smallest, self-powered, ac frequency meters. Simply connect the ac line to the two rear input terminals, and the unit is fully operational with no additional components or auxiliary power required! Two, 50/60Hz models operate over input voltage ranges of 85-140Vac or 170-264Vac. A third, 400Hz model operates over an input voltage range of 85-140Vac. Despite their small size (1.38" x 0.88" x 1.0"), DMS-20PC-FM meters feature large 0.40"/10.2mm red LEDs that can be read easily from 15 feet away.

FEATURES
■ Self-powered, no external supplies required
■ 3 models: 47.0-99.0Hz (85-140Vac) 47.0-99.0Hz (170-264Vac) 350-450Hz (85-140Vac)
■ Screw terminals simplify panel mounting
■ Ideal for emergency power equipment
■ Small 1.38" x 0.88" x 1.0" packages
■ Epoxy encapsulated for harsh environments
■ Large (0.40"/10.2mm) red LED displays

Description
Silicon Labs Si4362 devices are high-performance, low-current receivers covering the sub-GHz frequency bands from 142 to 1050 MHz. The radios are part of the EZRadioPRO® family, which includes a complete line of transmitters, receivers, and transceivers covering a wide range of applications. All parts offer outstanding sensitivity of –126 dBm while achieving extremely low active and standby current consumption. The 60 dB adjacent channel selectivity with 12.5 kHz channel spacing ensures robust receive operation in harsh RF conditions, which is particularly important for narrowband operation.

Features
■ Frequency range = 142–1050 MHz
■ Receive sensitivity = –126 dBm
■ Modulation
    ●(G)FSK, 4(G)FSK, (G)MSK
    ●OOK and ASK
■ Low active power consumption
    ●10/13 mA RX
■ Ultra low current powerdown modes
    ●30 nA shutdown, 50 nA standby
■ Data rate = 100 bps to 1 Mbps
■ Fast wake and hop times
■ Power supply = 1.8 to 3.6 V
■ Excellent selectivity performance
    ●60 dB adjacent channel
    ●75 dB blocking at 1 MHz
■ Antenna diversity and T/R switch control
■ Highly configurable packet handler
■ RX 64 byte FIFOs
■ Auto frequency control (AFC)
■ Automatic gain control (AGC)
■ Low BOM
■ Low battery detector
■ Temperature sensor
■ 20-Pin QFN package

Applications
■ Smart metering (802.15.4g and MBus)
■ Remote control
■ Home security and alarm
■ Telemetry
■ Garage and gate openers
■ Remote keyless entry
■ Home automation
■ Industrial control
■ Sensor networks
■ Health monitors
■ Electronic shelf labels

DATELs new DMS-20PC-FM Series are the world’s smallest, self-powered, ac frequency meters. Simply connect the ac line to the two rear input terminals, and the unit is fully operational with no additional components or auxiliary power required! Two, 50/60Hz models operate over input voltage ranges of 85-140Vac or 170-264Vac. A third, 400Hz model operates over an input voltage range of 85-140Vac. Despite their small size (1.38" x 0.88" x 1.0"), DMS-20PC-FM meters feature large 0.40"/10.2mm red LEDs that can be easily read from 15 feet away.

Features
• Self-powered, no external supplies required
• 3 models: 47.0-99.0Hz (85-140Vac) 47.0-99.0Hz (170-264Vac) 350-450Hz (85-140Vac)
• Screw terminals simplify panel mounting
• Ideal for emergency power equipment
• Small 1.38" x 0.88" x 1.0" packages
• Epoxy encapsulated for harsh environments
• Large (0.40"/10.2mm) red LED displays

[Fortemedia]

Overview
Incorporating the latest Fortemedia technologies for removing ambient noise and acoustic echoes, the FM1288 preserves voice naturalness for greater speech intelligibility in a variety of noisy automotive enviroments. Designed to be compatible with a wide range of host processors and blue-tooth devices, the FM1288 voice processor is designed for easy system integration.

Key Features
■ Highly integrated SOC
   o Digital Signal Processor(DSP) with Hardware Accelerators, RAM, and ROM
   o 3 ADC (Analog to Digital Converter)
   o 2 DAC (Digital to Analog Converter)
   o Differential I/O on all analogs to improve noise immunity
   o 2 On-chip analog microphone inputs
   o IIC-Compatible Serial (SHI) and UART control interface to host processor
   o IIS-Compatible and PCM data interface to host or Bluetooth processor
   o Built-in PLL supports highly flexible clocking input
   o Can operate as co-processor or as standalone processor
■ High performance
   o Advanced algorithms for acoustic echo cancellation and noise reduction
   o Robust full-duplex for in-vehicle applications
   o Preserves voice naturalness and effective in automotive environment
   o Wideband (HD Voice) and narrowband voice processing
   o Bright Voice Enhancement (BVE) for downlink listening improvement
   o Dynamic Range Control (DRC) for range control
   o Equalization (EQL) on uplink and downlink voice paths
   o Line in and Line out signal path Automatic Gain Control (AGC)
   o Configurable processing modules performance
   o Non-invasive run-time performance tuning via UART and IIC-compatible port
   o Run time switching between processing mode and various by-pass modes
   o User-selectable between two microphone inputs (usage - one for
      front-seat passengers and another for back-seat passengers in vehicle cabins)
■ Available in 48-pin LQFP packages, Automotive Grade

General Description
The RDA5820 is a single-chip broadcast FM transceiver with fully integrated synthesizer, IF selectivity and MPX decoder. The chip uses the CMOS process, support multi-interface and require the least external component. The package size is 4X4mm and is completely adjustment-free. All these make it very suitable for portable devices.
The RDA5820 has a powerful low-IF digital audio processor, this make it have optimum sound quality with varying reception conditions.
The RDA5820 use RDA patented dual synthesizers, all digital transmit structure, this make it have perfectly transmition performance and agility.
The RDA5820 support 65M~115M frequency band receive and transmit, integrate 4K memory, these make it can be used in simple wireless control appliance such as toy.

Features
● CMOS single-chip fully-integrated FM transceiver
● Low power consumption
   ► Total current consumption lower than 20mA at 3.0V power supply
● Support worldwide and campus frequency band
   ► 65 -115 MHz
● Digital low-IF tuner
   ► Image-reject down-converter
   ► High performance A/D converter
   ► IF selectivity performedinternally
● Fully integrated digital frequency synthesizer
   ► Fully integrated on-chip RF and IF VCO
   ► Fully integrated on-chip loopfilter
● All digital transmitter
● Autonomous search tuning
● Support integrated Rx/Tx PCB antenna
● Support SNRFM searching
● Include 4K memory
● Support 32.768KHz crystal oscillator
● Digital auto gain control (AGC)
● Digital adaptive noise cancellation
   ► Mono/stereo switch
   ► Soft mute
   ► High cut
● Programmable de-emphasis (50/75 ms)
● Receive signal strength indicator (RSSI)
● Bass boost
● Volume control
● Support I2S digital transmitter
● Support audio power amplifier ( 32Ω resistance loading)
● I2S digital input / output interface
● Line-level analog output voltage
● 32.768 KHz, 12M,24M,13M,26M,19.2M,38.4MHz reference clock
● 2-wire and 3-wire serial control bus interface
● Directly support 32Ω resistance loading
● Integrated LDO regulator
   ► 2.7 to 5.5 V operation voltage
● 4X4mm 24 pinQFN package

Applications
● Cellular handsets
● MP3, MP4 players
● Portable radios
● PDAs, Notebook PCs
● Wireless Toys

RF & MICROWAVE TRANSISTORS FM broadcast APPLICATIONS

Overview
The LC72700E and LC72700G are data decoder LSIs for receiving DARCTM mobile FM multiplex broadcasts. A multi-function, compact, adjustment-free system can be implemented in two chips by combining this LSI with the LV3400M band-pass filter IC, which extracts the multiplex components from a composite FM signal.
   
Functions and Features
• Delay detection scheme using a 1T delay
• Built-in error correction function using a 2T delay
• Digital PLL clock regeneration
• Block and frame synchronization detection with a settable synchronization protection count
• Settable block identifier code (BIC) detection precision
• Error correction using (272,190) codes
• Built-in frame memory for product codes
• Support for both serial and parallel data I/O
• Package
    LC72700E: QFP48E
    LC72700G: QFP48G
   

Bi-directional ESD diode